SGP1A Datasheet, PDF (1/4 Pages) GOOD-ARK Electronics – Surface Mount Glass Passivated Standard Rectifier Reverse Voltage 50~1000V Forward Current 1A

SGP1A thru SGP7A
Surface Mount Glass Passivated Standard Rectifier
Reverse Voltage 50~1000V Forward Current 1A
Features
• Low forward voltage drop
• Low leakage current
• Glass passivated Standard Rectifiers
• Low profile - typical height of 1.0 mm
• Moisture sensitivity: level 1, per J-STD-020
• High temperature soldering guaranteed: 260℃/10 seconds
• Halogen-free according to IEC 61249-2-21 definition
Typical Applications
eSGP(SOD‐323F)
For use of general purpose rectification in lighting, cellular phone, portable device,
power supplies and other consumer applications.
Maximum Ratings (TA = 25 °C unless otherwise noted)
Parameter
Symbol SGP1A SGP2A SGP3A SGP4A SGP5A SGP6A SGP7A Unit
Maximum repetitive peak reverse voltage VRRM 50
Maximum RMS voltage
VRMS 35
Maximum DC blocking voltage
VDC
50
Maximum average forward rectified
current at TL(See Fig.1)
IF(AV)
Peak forward surge current 8.3 ms single
half sine-wave superimposed on rated
load
IFSM
Operating junction and storage
temperature range
TJ,
TSTG
100 200 400 600 800 1000 V
70
140 280 420 560 700
V
100 200 400 600 800 1000 V
1.0
A
25
A
- 55 to + 150
°C
Electrical Characteristics (TA = 25 °C unless otherwise noted)
Parameter
Test Conditions Symbol SGP1A SGP2A SGP3A SGP4A SGP5A SGP6A SGP7A Unit
Maximum
instantaneous forward ^{1 A}
V_F
voltage
Maximum DC reverse TA=25℃
current
TA=125℃
I_R
Typical reverse
recovery time
I_F=0.5A,I_R=1.0A,
I_rr=0.25A
t_rr
Typical junction
capacitance
4.0 V, 1 MHz
C_J
1.1
Volts
5
µA
50
1.8
uS
5
pF
Typical thermal
resistance¹⁾
juntion to mount R_θJM
55
℃/W
Note:1),The thermal resistance from junction to mount,mounted on P.C.B with 5×5mm copper pads,2 OZ,FR4 PCB
www.goodark.com
1/4
2015.01-Rev.A