SGP0230SD_15 Datasheet, PDF (1/4 Pages) GOOD-ARK Electronics – Surface Mount Schottky Rectifier Reverse Voltage 30~40V Forward Current 2A

SGP0230SD thru SGP0240SD
Surface Mount Schottky Rectifier
Reverse Voltage 30~40V Forward Current 2A
Features
• Low VF Schottky barrier diodes
• Very low profile - typical height of 1.0 mm
• Low forward voltage drop
• Moisture sensitivity: level 1, per J-STD-020
• High temperature soldering guaranteed: 260℃/10 seconds
eSGP(SOD‐323F)
Typical Applications
For use of fast swiching in RF module, lighting, cellular phone, portable device,
power supplies and other consumer applications.
Maximum Ratings (TA = 25 °C unless otherwise noted)
Parameter
Symbol
SGP0230SD
SGP0240SD
Unit
Maximum repetitive peak reverse voltage
VRRM
30
40
V
Maximum RMS voltage
VRMS
21
28
V
Maximum DC blocking voltage
VDC
30
40
V
Maximum average forward rectified current
IF(AV)
2.0
A
Peak forward surge current 8.3 ms single half
sine-wave superimposed on rated load
IFSM
40
A
Operating junction and storage temperature range
TJ,
TSTG
- 55 to + 150
°C
Electrical Characteristics (TA = 25 °C unless otherwise noted)
Parameter
Test Conditions Symbol
SGP0230SD
SGP0240SD
Maximum instantaneous
forward voltage
IF=2A,TA=25℃
V_F
0.55
Maximum DC reverse current at
rated DC blocking voltage
TA=25℃
I_R
0.1
Typical junction capacitance 4.0 V, 1 MHz
C_J
120
Typical thermal resistance
juntion to mount R_θJM
60
Note:1),The thermal resistance from junction to mount,mounted on P.C.B with 5×5mm copper pads,2 OZ,FR4 PCB
Unit
Volts
mA
pF
℃/W
www.goodark.com
1/4
2015.02-Rev.A