SGC151BS_15 Datasheet, PDF (1/4 Pages) GOOD-ARK Electronics – Surface Mount Schottky Rectifier Reverse Voltage 100V Forward Current 15A

SGC151BS
Surface Mount Schottky Rectifier
Reverse Voltage 100V Forward Current 15A
Features
• Heatsink design
• Schottky barrier diodes
• Low forward voltage drop
• Low leakage current
• Solder dip 260 °C, 10 s
• Low profile - typical height of 1.1 mm
• Moisture sensitivity: level 1, per J-STD-020
Cathode
& Heatsink
• Halogen-free according to IEC 61249-2-21 definition
• High temperature soldering guaranteed: 260℃/10 seconds
Typical Applications
eSGC (TO‐277)
Anode 1
Anode 2
For low voltage high frequency inverters, DC/DC converters and polarity protection application.
Maximum Ratings (TA = 25 °C unless otherwise noted)
Parameter
Symbol
SGC151BS
Unit
Maximum repetitive peak reverse voltage
VRRM
100
V
Maximum RMS voltage
VRMS
70
V
Maximum DC blocking voltage
VDC
100
V
Maximum average forward rectified current
IF(AV)¹⁾
8.0
A
IF(AV)²⁾
15.0
Peak forward surge current 8.3 ms single
half sine-wave superimposed on rated load
IFSM
250
A
Operating junction and storage temperature
range
TJ, TSTG
-55 to +150
°C
Electrical Characteristics (TA = 25 °C unless otherwise noted)
Parameter
Test Conditions Symbol
Maximum instantaneous forward voltage
I_F=2A
I_F=5A
I_F=10A
T_A=25℃
V_F
I_F=15A
Maximum DC reverse current at rated DC
blocking voltage
VR=100V
T_A=25℃
T_A=100℃
I_R
Typical junction capacitance
4.0 V, 1 MHz
C_J
Typical thermal resistance
juntion to ambient
juntion to mount
R_θJA ¹⁾
R_θJM ²⁾
Notes,1)Thermal resistance RθJA is junction to lead,mounted on P.C.B with 30*30mm copper pad area
2)Thermal resistance R_θJM is junction to mount.Mounted on aluminum substrate P.C.B
SGC151BS
0.42
0.47
0.52
0.58
250
30
1.78
35
5
Unit
Volts
uA
mA
nF
℃/W
℃/W
www.goodark.com
1/4
2015.04-Rev.A