SGC10CS_15 Datasheet, PDF (1/4 Pages) GOOD-ARK Electronics – Surface Mount Schottky Rectifier Reverse Voltage 200V Forward Current 10A

SGC10CS
Surface Mount Schottky Rectifier
Reverse Voltage 200V Forward Current 10A
Features
• Heatsink design
• Schottky barrier diodes
• Low leakage current
• Solder dip 260 °C, 10 s
• Low forward voltage drop
• Low profile - typical height of 1.1 mm
• Moisture sensitivity: level 1, per J-STD-020
• High temperature soldering guaranteed: 260℃/10 seconds
Cathode
& Heatsink
eSGC (TO‐277)
Anode 1
Anode 2
Typical Applications
For low voltage high frequency inverters, DC/DC converters and polarity protection application.
Maximum Ratings (TA = 25 °C unless otherwise noted)
Parameter
Symbol
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward rectified current
Peak forward surge current 8.3 ms single
half sine-wave superimposed on rated load
Operating junction and storage temperature
range
VRRM
VRMS
VDC
IF(AV)¹⁾
IFSM
TJ, TSTG
SGC10CS
Unit
200
V
140
V
200
V
10.0
A
175
A
-55 to +150
°C
Electrical Characteristics (TA = 25 °C unless otherwise noted)
Parameter
Test Conditions Symbol
Maximum instantaneous forward voltage
I_F=10A
T_A=25℃
V_F
Maximum instantaneous reverse current
VR=200V
T_A=25℃
T_A=125℃
I_R
Typical junction capacitance
4.0 V, 1 MHz
C_J
Typical thermal resistance
juntion to mount
R_θJM ¹⁾
Note1)Thermal resistance R_θJM is junction to mount,mounted on P.C.B with 30*30mm copper pad area
MAX.
0.85
50
20
206
5
Unit
Volts
uA
mA
pF
℃/W
www.goodark.com
1/4
2015.04-Rev.A