SES5VLCT523-3U Datasheet, PDF (1/4 Pages) GOOD-ARK Electronics – Ultra Small ESD Protector

Ultra Small ESD Protector
SES5VLCT523-3U
Description
TVS diodes are designed to replace multilayer varistors (MLVs) in portable
applications such as cell phones, notebook computers, and PDA’s. They
offer superior electrical characteristics such as lower clamping voltage and
no device degradation when compared to MLVs.
The SES5VLCT523-3U is a TVS array designed to protect I/O or data lines
from the damaging effects of ESD. The SOT-523 is a very small package
which allows space saving on high density printed circuit board and also gives
the designer the flexibility to provide two I/O lines protection.
Feature
　■
■
■
■
■
■
■
■
Solid-state silicon-avalanche technology
SOT-523 package
Protect up two data lines
Low clamping voltage
Working voltage: 5V
Low leakage current
125 watts peak pulse power(Tp=8/20us)
Complies with the following standards: IEC 61000-4-2(ESD)Air-15kv,Contact-8kv
SES Series
ROH S
Applications
■ High-Definition Multimedia Interface(HDMI)
■ Mobile Display Digital Interface(MDDI)
■ RF/Antenna Circuits
■ USB 2.0&Firewire Ports
■ HBT Power Amp Protection
■ Infiniband Transceiver Protection
Electrical characteristics per line@25°C(unless otherwise specified)
Parameter
Reverse stand-off voltage
Reverse Breakdown voltage
Reverse Leakage Current
Clamping Voltage
Clamping Voltage
Clamping Voltage
Junction Capacitance
Junction Capacitance
Symbol
V_RWM
Conditions
VBR
It = 1mA
IR
VRWM = 5V T=25°C
VC
I_PP = 1A, t_P = 8/20μＳ pin1 to pin2
V_C
I_PP= 5A, t_P = 8/20μＳ
pin1 or pin2 to pin3
V_C
I_PP= 5A, t_P = 8/20μＳ
pin1 to Pin2
Cj
VR=0V f = 1MHz Pin1 to Pin2
Cj
VR=0V f = 1MHz
pin1 or Pin2 to Pin3
Min.
6
Typ.
Max. Units
5
V
V
1
μA
15
V
22
V
25
V
0.6 0.9
pF
1.2
pF
Ultra Small ESD Protector
1
www.goodark.com