RS1001FL Datasheet, PDF (1/4 Pages) Pan Jit International Inc. – SMALL SURFACE MOUNT FAST DIODES

RS1001FL thru RS1010FL
Surface Mount Glass Passivated Fast Recovery Rectifier
Reverse Voltage 50~1000V Forward Current 1A
Features
• Glass passivated Fast Recovery rectifiers
• Very low profile - typical height of 1.0 mm
• Low forward voltage drop
• Low leakage current
• Moisture sensitivity: level 1, per J-STD-020
• AEC-Q101 qualified
• High temperature soldering guaranteed: 260℃/10 seconds
• Halogen-free according to IEC 61249-2-21 definition
eSGA
(SOD-123FL)
Typical Applications
For use of general purpose rectification in lighting, cellular phone, portable device,
power supplies and other consumer applications.
Maximum Ratings (TA = 25 °C unless otherwise noted)
Parameter
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward rectified current
Peak forward surge current 8.3 ms single half sine-
wave superimposed on rated load
Operating junction and storage temperature range
Symbol
RS1001 RS1002 RS1003 RS1004 RS1006 RS1008 RS1010
FL
FL
FL
FL
FL
FL
FL
Unit
VRRM
50
100 200 400 600 800 1000
V
VRMS 35
70
140 280 420 560 700
V
VDC
50
100 200 400 600 800 1000
V
IF(AV)
1.0
A
IFSM
30
A
TJ, TSTG
- 55 to + 150
°C
Electrical Characteristics (TA = 25 °C unless otherwise noted)
Parameter
Test Conditions
Symbol
RS1001 RS1002 RS1003 RS1004 RS1006 RS1008 RS1010
FL
FL
FL
FL
FL
FL
FL
Unit
Maximum instantaneous forward
voltage
1A
V_F
1.3
Volts
Maximum DC reverse current at
rated DC blocking voltage
TA=25℃
TA=125℃
I_R
5
50
I_F=0.5A,I_R=1.0A,
Maximum reverse recovery time
t_rr
I_rr=0.25A
150
250
500
Typical junction capacitance
4.0 V, 1 MHz
C_J
8.2
juntion to ambient R_θJA
76
Typical thermal resistance¹⁾
juntion to case
R_θJC
42
juntion to mount
R_θJM
7
Note:1),The thermal resistance from junction to ambient,case or mount,mounted on P.C.B with 5×5mm copper pads,2 OZ,FR4 PCB
µA
nS
pF
℃/W
www.goodark.com
1/4
2014.06-Rev.A