R12A Datasheet, PDF (1/4 Pages) GOOD-ARK Electronics – Surface Mount Glass Passivated Fast Recovery Rectifier

R12A thru R12M
Surface Mount Glass Passivated Fast Recovery Rectifier
Reverse Voltage 50~1000V Forward Current 1.2A
Features
• Glass passivated Fast Recovery rectifiers
• Very low profile - typical height of 1.0 mm
• Low forward voltage drop
• Low leakage current
• Moisture sensitivity: level 1, per J-STD-020
• High temperature soldering guaranteed: 260℃/10 seconds
• Halogen-free according to IEC 61249-2-21 definition
eSGA
(SOD-123FL)
Typical Applications
For use of general purpose rectification in lighting, cellular phone, portable device,
power supplies and other consumer applications.
Maximum Ratings (TA = 25 °C unless otherwise noted)
Parameter
Symbol R12A R12B R12D R12G R12J R12K R12M Unit
Maximum repetitive peak reverse voltage VRRM 50
Maximum RMS voltage
VRMS 35
Maximum DC blocking voltage
Maximum average forward rectified
current
VDC 50
IF(AV)
Peak forward surge current 8.3 ms single
half sine-wave superimposed on rated
IFSM
load
100 200 400 600 800 1000 V
70
140 280 420 560 700 V
100 200 400 600 800 1000 V
1.2
A
50
A
Operating junction and storage
temperature range
TJ,
TSTG
- 55 to + 150
°C
Electrical Characteristics (TA = 25 °C unless otherwise noted)
Parameter
Test Conditions Symbol R12A R12B R12D R12G R12J R12K R12M Unit
Maximum
instantaneous forward 1 .2A
V_F
voltage
Maximum DC reverse TA=25℃
current at rated DC
I_R
blocking voltage
TA=125℃
Maximum reverse
recovery time
I_F=0.5A,I_R=1.0A,
I_rr=0.25A
t_rr
150
Typical junction
capacitance
4.0 V, 1 MHz
C_J
Typical thermal
resistance¹⁾
juntion to mount
juntion to ambient
juntion to case
R_θJM
R_θJA
R_θJC
Note1):Mounted on PCB with 5.0×5.0mm copper pads,2 OZ,FR4 PCB;
1.3
5
50
250
7.5
3.3
67
25
Volts
µA
500
nS
pF
℃/W
www.goodark.com
1/4
2015.11-Rev.A