PU1 Datasheet, PDF (1/4 Pages) GOOD-ARK Electronics – Surface Mount Glass Passivated Superfast Rectifier

PU1 thru PU5
Surface Mount Glass Passivated Superfast Rectifier
Reverse Voltage 50~600V Forward Current 1A
Features
• Glass passivated superfast recovery Rectifiers
• Low profile, typical thickness 0.8mm
• Low forward voltage drop
• Low leakage current
• Moisture sensitivity: level 1, per J-STD-020
• Heatsink structure
• High temperature soldering guaranteed: 260℃/10 seconds
iSGA
(SOD-123HS)
Typical Applications
For use of general purpose rectification in lighting, cellular phone, portable device, power supplies
and other consumer applications.
Maximum Ratings (TA = 25 °C unless otherwise noted)
Parameter
Symbol PU1
PU2
PU3
PU4
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward rectified current
VRRM
50
VRMS
35
VDC
50
IF(AV)
Peak forward surge current 8.3 ms single half sine-
wave superimposed on rated load
IFSM
100
200
400
70
140
280
100
200
400
1
30
Operating junction and storage temperature range TJ, TSTG
- 55 to + 150
PU5
Unit
600
V
420
V
600
V
A
A
°C
Electrical Characteristics (TA = 25 °C unless otherwise noted)
Parameter
Test Conditions Symbol PU1
PU2
PU3
PU4
Minimum Breakdown voltage Ta=25℃,IR=100uA V_BR
200
400
Maximum instantaneous
forward voltage
1A
V_F
0.95
1.3
Maximum DC reverse current at TA=25℃
rated DC blocking voltage
TA=125℃
I_R
5.0
100
Maximum reverse recovery time ^{IF=0.5A,IR=1.0A,}
I_rr=0.25A
t_rr
35
Typical junction capacitance 4.0 V, 1 MHz
C_J
7
juntion to ambient R_θJA¹⁾
63
Typical thermal resistance
juntion to lead
R_θJL¹⁾
9
juntion to case
R_θJC²⁾
39
Note:1),The thermal resistance from junction to ambient or lead, mounted on P.C.B with 5×5mm copper pads,2 OZ,FR4 PCB
2),The thermal resistance from junction to case, mounted on P.C.B with recommended copper pads,2 OZ,FR4 PCB
PU5
Unit
600
Volts
1.7
µA
nS
pF
℃/W
www.goodark.com
1/4
2016.06-Rev.A