MF2M Datasheet, PDF (1/2 Pages) GOOD-ARK Electronics – Miniature Glass Passivated Single-Phase Bridge Rectifiers

MF2M thru MF10M / MF2S thru MF10S
Miniature Glass Passivated Single-Phase Bridge Rectifiers
Reverse Voltage 200 to 1000 Volts Forward Current 1.0 Ampere
Features
Plastic package has Underwriters Laboratory Flammability
Classification 94V-0
Glass passivated chip junctions
High surge overload rating: 40A peak
Saves space on printed circuit boards
Recommended for non-automotive applications
Mechanical Data
Case: MFxM (MBM), MFxS (MBS)
Molded plastic body over passivated junctions
Terminals: Plated leads solderable per MIL-STD-750,
Method 2026
Mounting Position: Any
Weight: 0.078 oz., 0.22 g
Maximum Ratings and Electrical Characteristics
(T_A=25^oC unless otherwise noted)
Parameter
Symbols
MF2M
MF2S
Maximum repetitive peak reverse voltage
V_RRM
200
Maximum RMS voltage
V_RMS
140
Maximum DC blocking voltage
V_DC
200
Maximum average forward output rectified current (see Fig.1)
I_F(AV)
Peak forward surge current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC Method)
I_FSM
Rating for fusing (t < 8.3ms)
I²t
Maximum instantaneous forward voltage drop per leg at 0.4A
Maximum DC reverse current at
rated DC blocking voltage per leg
T_A = 25^oC
T_A = 125^oC
Typical thermal resistance per leg
Typical junction capacitance per leg ⁽³⁾
Operating junction and storage temperature range
V_F
I_R
R_θJA
R_θJA
R_θJL
C_J
T,T
J STG
MF4M
MF4S
400
280
400
MF6M
MF6S
600
420
600
1.0
MF8M
MF8S
800
560
800
40.0
5.0
1.1
5.0
100
85 ⁽¹⁾
70 ⁽²⁾
20 ⁽¹⁾
13
-55 to +150
MF10M
MF10S
1000
700
1000
Notes:
1. On glass epoxy P.C.B. mounted on 0.05 x 0.05" (1.3 x 1.3mm) pads
2. On aluminum substrate P.C.B. with an area of 0.8 x 0.8" (20 x 20mm) mounted on 0.05 x 0.05" (1.3 x 1.3mm) solder pad
3. Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts
Units
Volts
Volts
Volts
Amp
Amps
A²sec
Volt
uA
o_C/W
pF
o_C
420