MBRF30200CT Datasheet, PDF (1/4 Pages) Tiger Electronic Co.,Ltd – TO-220F Plastic-Encapsulate Diodes

MBR(F)30200CT
Schottky Barrier Rectifier
Reverse Voltage 200 Volts Forward Current 30 Amperes
Features
● Plastic package has underwriters Laboratory
Flammability Classification 94V-0
● Dual rectifier construction, positive center tap
● Metal of silicon rectifier, majority carrier conduction
● Low forward voltage, high efficiency
● Guarding for over voltage protection
Package: ITO-220-AB
Package: TO-220-AB
Mechanical Data
● Case: Epoxy，Molded
● Weight: 1.9grams（approximately）
● Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable
● Lead Temperature for Soldering Purposes: 260°C Max. for 10 sec
● Shipped 50 units per plastic tube
Maximum Ratings & Electrical Characteristics
(TA=25℃ unless otherwise noted)
PARAMETER
TEST
SYMBOL MBR(F)30200CT
CONDITIONS
Maximum repetitive peak reverse voltage
VRRM
200
Working peak reverse voltage
VRWM
200
Maximum DC blocking voltage
VDC
200
Maximum average forward rectified current at
IF(AV)
30
Tc=105°C total device per diode
15
Peak forward surge current 8.3ms single half sine-wave superimposed
on rated load per diode
IFSM
200
Peak repetitive reverse current per leg at tp=2.0us ,1KHz
IRRM
1.0
Voltage rate of change（rated VR）
DV/dt
10000
Operating junction temperature range
TJ
―55 to+150
Storage temperature range
TSTG
―55 to+150
Isolation voltage (ITO-220-AB only) from terminal to heatsink t = 1 sec
VAC
1500
Maximum instantaneous forward voltage per leg
IF=15A
IF=15A
TC=25℃
VF
TC=125℃
1.00
0.92
Maximum reverse current per leg at working peak
Reverse voltage
TJ=25℃
IR
TJ=100°C
200
15
Thermal Characteristics TA=25℃ unless otherwise noted
Symbol
Parameter
TYP（TO-220-AB）
TYP（ITO-220-AB）
RθJC
Thermal Resistance, Junction to Case per Leg
2.0
4.0
RθJA
Thermal Resistance, Junction to Ambient per Leg
62.5
62.5
UNIT
V
V
V
A
A
A
V/us
°C
°C
V
V
uA
mA
Unit
°C /W
°C /W
Note：Pulse test:300us pulse width, duty cycle=2%
www.goodark.com
1/4
2013.12REV.A