M1 Datasheet, PDF (1/4 Pages) Won-Top Electronics – 1.0A SURFACE MOUNT GLASS PASSIVATED RECTIFIER

M1 thru M7
Surface Mount Glass Passivated Standard Rectifier
Reverse Voltage 50~1000V Forward Current 1A
Features
• Glass passivated Standard rectifiers
• Ideal for automated placement
• Low forward voltage drop
• High forward surge capability
• Moisture sensitivity: level 1, per J-STD-020
• AEC-Q101 qualified
Typical Applications
DO‐214AC(SMA)
• For use of general purpose rectification in lighting, cellular phone, portable device,
power supplies and other consumer applications.
Mechanical Data
• Case:DO-214AC, molded epoxy body，Epoxy meets UL 94V-0 flammability rating
• Terminal:Matte tin plated leads, solderable per J-STD-002 and JESD22B-106
• Polarity:Indicated by cathode band
Maximum Ratings and Electrical Characteristics
(TA = 25 °C unless otherwise noted)
Parameter
Symbol M1
M2
M3
M4
M5
M6
M7 Unit
Maximum repetitive peak reverse voltage VRRM 50
Maximum RMS voltage
VRMS 35
Maximum DC blocking voltage
VDC
50
Maximum average forward rectified current IF(AV)
100
200
400
600
800 1000
70
140
280
420
560
700
100
200
400
600
800 1000
1.0
Peak forward surge current 8.3 ms single
half sine-wave superimposed on rated load
IFSM
30.0
Maximum forward voltage at I_F=1.0Amps
Maximum DC reverse
@Ta=25℃
current at rated DC blocking _{@Ta=125℃}
Typical junction capacitance(Note1)
Typical thermal resistance(Note2)
Typical thermal resistance(Note2)
Operating junction and storage temperature
range
V_F
I_R
C_J
R_θJA
R_θJL
TJ,
TSTG
1.0
5.0
50.0
10.0
75.0
20.0
- 55 to + 150
Notes:1.Measured at 1.0MHz and applied reverse voltage of 4.0 D.C.
2.Thermal resistance from junction to lead, 0.197×0.197^〃（5.0×5.0mm）copper pads to each terminal
V
V
V
A
A
Volts
uA
pF
℃/W
℃/W
°C
www.goodark.com
1/4
2014.02-Rev.B