LS12_15 Datasheet, PDF (1/4 Pages) GOOD-ARK Electronics – Surface Mount Schottky Rectifier Reverse Voltage 20~200V Forward Current 1A

LS12 thru LS1CH
Surface Mount Schottky Rectifier
Reverse Voltage 20~200V Forward Current 1A
Features
• Schottky barrier diodes
• Low forward voltage drop
• Low leakage current
• Moisture sensitivity: level 1, per J-STD-020
• Solder dip 260 °C, 10 s
• Low profile， typical thickness 1.0mm
• AEC-Q101 qualified
Typical Applications
eSGB (SMAF)
For use of fast swiching in RF module, lighting, cellular phone, portable device,
power supplies, and other consumer applications.
Maximum Ratings (TA = 25 °C unless otherwise noted)
Parameter
Symbol LS12 LS14 LS16 LS18 LS19 LS1B LS1BH LS1B5H LS1CH Unit
Maximum repetitive peak reverse
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward rectified
current
VRRM 20 40 60 80 90 100 100 150 200 V
VRMS 14 28 42 56 63 70 70
105 140 V
VDC 20 40 60 80 90 100 100 150 200 V
IF(AV)
1.0
A
Peak forward surge current 8.3 ms
single half sine-wave superimposed on IFSM
30
A
rated load
Operating junction and storage
temperature range
TJ,
TSTG
- 55 to + 150
°C
Electrical Characteristics (TA = 25 °C unless otherwise noted)
Parameter
Test Conditions Symbol LS12 LS14 LS16 LS18 LS19 LS1B LS1BH LS1B5H LS1CH Unit
Maximum
instantaneous
IF=1A, TA=25℃ VF
0.50
0.70
0.81
0.90
forward voltage
Maximum DC
reverse current at
TA=25℃
IR
0.3
rated DC blocking
voltage
TA=100℃
10
Typical junction
capacitance
4.0 V, 1 MHz
C_J
50
Typical thermal
resistance
juntion to lead R_θJL1)
19
Note1:Thermal resistance from junction to lead,mounted on PCB with 0.315×0.315〃（8.0×8.0mm）copper pads
Volts
mA
pF
℃/W
www.goodark.com
1/4
2015.07-Rev.B