LMS26_15 Datasheet, PDF (1/4 Pages) GOOD-ARK Electronics – Low Profile Surface Mount Schottky Bridge Rectifiers Reverse Voltage 60V Output Current 2A

LMS26
Low Profile Surface Mount Schottky Bridge Rectifiers
Reverse Voltage 60V Output Current 2A
Features
• Super Low VF Schottky barrier bridge rectifiers
• Low profile，Max Height 1.30mm
• Low forward voltage drop
• Low leakage current
• Moisture sensitivity: level 1, per J-STD-020
• AEC-Q101 qualified
• High temperature soldering guaranteed: 260℃/10 seconds
• Halogen-free according to IEC 61249-2-21 definition
Typical Applications
LPMB
For use of fast swiching in RF module, lighting, cellular phone, portable device,
power supplies and other consumer applications.
Maximum Ratings (TA = 25 °C unless otherwise noted)
Parameter
Symbol
LMS26
Unit
Maximum repetitive peak reverse voltage
VRRM
60
V
Maximum RMS voltage
VRMS
42
V
Maximum DC blocking voltage
VDC
60
V
Maximum average output rectified current
Io(AV)¹⁾
2.0
A
Peak forward surge current 8.3 ms single half sine-
wave superimposed on rated load
IFSM
50
A
Operating junction temperature range
T_J
- 55 to + 150
°C
Storage temperature range
T_STG
- 55 to + 150
°C
Electrical Characteristics (TA = 25 °C unless otherwise noted)
Parameter
Maximum instantaneous
forward voltage
Maximum DC reverse current
at rated DC blocking voltage
Typical junction capacitance
Typical thermal resistance¹⁾
Notes:
Test Conditions Symbol
LMS26
IF=1A,TA=25℃
IF=2A,TA=25℃
V_F
0.55
0.6
TA=25℃
TA=125℃
I_R
200
30
4.0 V, 1 MHz
C_J
210
juntion to ambient R_θJA
48
juntion to case
R_θJC
15
1. On glass epoxy PCB, mounted on 1.3*1.3mm solder pads
Unit
Volts
uA
mA
pF
℃/W
www.goodark.com
1/4
2014.12-Rev.B