LMS1B_15 Datasheet, PDF (1/4 Pages) GOOD-ARK Electronics – Low Profile Surface Mount Schottky Bridge Rectifiers Reverse Voltage 100V Output Current 1A

LMS1B
Low Profile Surface Mount Schottky Bridge Rectifiers
Reverse Voltage 100V Output Current 1A
Features
• Low profile，Max Height 1.30mm
• Low forward voltage drop
• Super Low VF Schottky barrier bridge rectifiers
• Moisture sensitivity: level 1, per J-STD-020
• Halogen-free according to IEC 61249-2-21 definition
• High temperature soldering guaranteed: 260℃/10 seconds
LPMB
Typical Applications
For use of fast swiching in RF module, lighting, cellular phone, portable device,
power supplies and other consumer applications.
Maximum Ratings (TA = 25 °C unless otherwise noted)
Parameter
Symbol
LMS1B
Unit
Maximum repetitive peak reverse voltage
VRRM
100
V
Maximum RMS voltage
VRMS
70
V
Maximum DC blocking voltage
VDC
100
V
Maximum average output rectified current
Io(AV)¹⁾
1.0
A
Peak forward surge current 8.3 ms single half sine-
wave superimposed on rated load
IFSM
30
A
Operating junction temperature range
T_J
- 55 to + 150
°C
Storage temperature range
T_STG
- 55 to + 150
°C
Electrical Characteristics (TA = 25 °C unless otherwise noted)
Parameter
Test Conditions Symbol
LMS1B
Maximum instantaneous
forward voltage
Maximum DC reverse current
at rated DC blocking voltage
Typical thermal resistance¹⁾
Notes:
IF=0.5A,TA=25℃ V_F
0.75
TA=25℃
I_R
200
juntion to ambient R_θJA
50
1. On glass epoxy PCB, mounted on 1.3*1.3mm solder pads
Unit
Volts
uA
℃/W
www.goodark.com
1/4
2015.03-Rev.A