L3F1 Datasheet, PDF (1/4 Pages) GOOD-ARK Electronics – Surface Mount Glass Passivated Fast Recovery Rectifier

L3F1 thru L3F7
Surface Mount Glass Passivated Fast Recovery Rectifier
Reverse Voltage 50~1000V Forward Current 3A
Features
• Ideal for automated placement
• Low forward voltage drop
• Low leakage current
• Solder dip 260 °C, 10 s
• Glass passivated fast recovery rectifiers
• Low profile， typical thickness 1.0mm
• Moisture sensitivity: level 1, per J-STD-020
Typical Applications
eSGB (SMAF)
For use of general purpose rectification in lighting, cellular phone, portable device, power
supplies, and other consumer applications.
Maximum Ratings (TA = 25 °C unless otherwise noted)
Parameter
Symbol L3F1 L3F2 L3F3 L3F4 L3F5 L3F6 L3F7 Unit
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward rectified current
Peak forward surge current 8.3 ms single half
sine-wave superimposed on rated load
Operating junction and storage temperature
range
VRRM 50
VRMS 35
VDC
50
IF(AV)
IFSM
TJ, TSTG
100 200 400 600 800 1000 V
70 140 280 420 560 700 V
100 200 400 600 800 1000 V
3.0
A
90
A
- 55 to + 150
°C
Electrical Characteristics (TA = 25 °C unless otherwise noted)
Parameter
Test Conditions Symbol L3F1 L3F2 L3F3 L3F4 L3F5 L3F6 L3F7 Unit
Maximum instantaneous
forward voltage
IF=3 A,TA=25℃
V_F
1.3
Maximum DC reverse current ^TA=25℃
at rated DC blocking voltage _TA=125℃
I_R
5
100
Maximum reverse recovery
time
I_F=0.5A,I_R=1.0A,
I_rr=0.25A
t_rr
150
250
Typical junction capacitance 4.0 V, 1 MHz
C_J
20
Typical thermal resistance¹⁾ juntion to mount R_θJM
20
Note:1),The thermal resistance from junction to mount,mounted on P.C.B with 8×8mm copper pads,2 OZ,FR4 PCB
V
µA
nS
pF
℃/W
www.goodark.com
1/4
2015.11-Rev.A