L21A Datasheet, PDF (1/4 Pages) GOOD-ARK Electronics – Surface Mount Glass Passivated Standard Rectifier

L2A1 thru L2A7/L21A thru L27A
Surface Mount Glass Passivated Standard Rectifier
Reverse Voltage 50~1000V Forward Current 2A
Features
• Glass passivated standard rectifiers
• Ideal for automated placement
• Low forward voltage drop
• Low leakage current
• Moisture sensitivity: level 1, per J-STD-020
• Solder dip 260 °C, 10 s
• Low profile， typical thickness 1.0mm
• AEC-Q101 qualified
Typical Applications
eSGB (SMAF)
For use of general purpose rectification in lighting, cellular phone, portable device,
power supplies, and other consumer applications.
Maximum Ratings (TA = 25 °C unless otherwise noted)
Parameter
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Symbol ^{L2A1 L2A2 L2A3 L2A4 L2A5 L2A6 L2A7} Unit
L21A L22A L23A L24A L25A L26A L27A
VRRM 50 100 200 400 600 800 1000 V
VRMS 35 70 140 280 420 560 700 V
VDC
50 100 200 400 600 800 1000 V
Maximum average forward rectified current
IF(AV)
2.0
A
Peak forward surge current 8.3 ms single half sine-
wave superimposed on rated load
IFSM
55
A
Operating junction and storage temperature range TJ, TSTG
- 55 to + 150
°C
Electrical Characteristics (TA = 25 °C unless otherwise noted)
Parameter
L2A1 L2A2 L2A3 L2A4 L2A5 L2A6 L2A7
Test Conditions Symbol
L21A L22A L23A L24A L25A L26A L27A
Maximum instantaneous forward
voltage
2A
VF
1.1
Maximum DC reverse current at TA=25℃
rated DC blocking voltage
TA=125℃
IR
5
50
Typical reverse recovery time
I_F=0.5A,I_R=1.0A,
I_rr=0.25A
t_rr
2.3
Typical junction capacitance
4.0 V, 1 MHz
CJ
6
Typical thermal resistance¹⁾
juntion to mount
R_θJM
20
Note:1),The thermal resistance from junction to mount,mounted on P.C.B with 8×8mm copper pads,2 OZ,FR4 PCB
Unit
Volts
µA
uS
pF
℃/W
www.goodark.com
1/4
2014.02-Rev.A