L1A Datasheet, PDF (1/4 Pages) GOOD-ARK Electronics – Surface Mount Glass Passivated Rectifier

L1A thru L7A
Surface Mount Glass Passivated Rectifier
Reverse Voltage 50~1000V Forward Current 1A
Features
• Glass passivated standard rectifiers
• Ideal for automated placement
• Low forward voltage drop
• Low leakage current
• Moisture sensitivity: level 1, per J-STD-020
• Solder dip 260 °C, 10 s
• Low profile， typical thickness 1.0mm
• AEC-Q101 qualified
Typical Applications
eSGB (SMAF)
For use of general purpose rectification in lighting, cellular phone, portable device,
power supplies, and other consumer applications.
Maximum Ratings (TA = 25 °C unless otherwise noted)
Parameter
Symbol L1A L2A L3A L4A L5A L6A L7A Unit
Maximum repetitive peak reverse voltage VRRM 50
Maximum RMS voltage
VRMS 35
Maximum DC blocking voltage
VDC
50
Maximum average forward rectified current
at TL
IF(AV)
(PSeak Ffoi _{rw1a)rd surge current 8.3 ms single}
half sine-wave superimposed on rated
IFSM
load
Operating junction and storage
temperature range
TJ, TSTG
100 200 400 600 800 1000 V
70
140 280 420 560 700
V
100 200 400 600 800 1000 V
1.0
A
30
A
- 55 to + 150
°C
Electrical Characteristics (TA = 25 °C unless otherwise noted)
Parameter
Test Conditions Symbol L1A L2A L3A L4A L5A L6A L7A Unit
Maximum
instantaneous forward ^{1 A}
VF
1.1
Maltximum DC reverse ^TA=25℃
5
current at rated DC
blocking voltage
TA=125℃
IR
50
Typical reverse
recovery time
I_F=0.5A,I_R=1.0A,
t_rr
I_rr=0.25A
1.8
Typical junction
capacitance
4.0 V, 1 MHz
CJ
6
Typical thermal
resistance¹⁾
juntion to mount
R_θJM
10
Note:1),The thermal resistance from junction to mount,mounted on P.C.B with 8×8mm copper pads,2 OZ,FR4 PCB
Volts
µA
uS
pF
℃/W
www.goodark.com
1/4
2014.03-Rev.A