GROA_15 Datasheet, PDF (1/2 Pages) GOOD-ARK Electronics – Fast Recovery Surface Mount Rectifiers Reverse Voltage 50 to 1000 Volts Forward Current 1.5 Amperes

GROA thru GROM
Fast Recovery Surface Mount Rectifiers
Reverse Voltage 50 to 1000 Volts Forward Current 1.5 Amperes
Features
‹ For surface mounted application
‹ Glass passivated junction chip
‹ Built-in strain relief, ideal for automated placement
‹ Plastic material used carries Underwriters Laboratory
Classification 94V-O
‹ Fast switching for high efficiency
‹ High temperature soldering:
250^oC/10 seconds at terminals
Mechanical Data
‹ Cases: Molded plastic
‹ Terminals: Solder plated
‹ Polarity: Indicated by cathode band
‹ Weight: 0.003 ounce, 0.093 gram
Maximum Ratings and Electrical Characteristics
Ratings at 25^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Parameter
Symbols GROA GROB
GROD
GROG
GROJ
GROK
GROM
Units
Maximum repetitive peak reverse voltage
V_RRM
50
100
200
400
600
800
1000
Volts
Maximum RMS voltage
V_RMS
35
70
140
280
420
560
700
Volts
Maximum DC blocking voltage
Maximum average forward rectified current
See Fig. 1 @ T =100^oC
L
Peak forward surge current, 8.3 ms single half sine-
wave superimposed on rated load (JEDEC Method)
V_DC
50
100
200
400
600
800
1000
Volts
I_(AV)
1.5
Amps
I_FSM
50.0
Amps
Maximum instantaneous forward voltage @ 1.5A
V_F
Maximum DC reverse current
at rated DC blocking voltage
@T_A=25^oC
@T_A=125^oC
I_R
Maximum reverse recovery time (Note 1)
t_rr
1.3
Volts
5.0
200
uA
150
250
500
nS
Typical junction capacitance (Note 2)
C_J
Typical thermal resistance (Note 3)
R_θJA
R_θJL
Operating junction temperature range
T_J
50
55.0
18.0
-55 to +150
pF
o_C/W
o_C
Storage temperature range
T_STG
-55 to +150
o_C
Notes:
1. Reverse Recovery Test Conditions: I_F=0.5A, I_R=1.0A, I_RR=0.25A
2. Measured at 1 MHz and Applied V =4.0 Volts
R
3. Thermal Resistance from Junction to Ambient and from Junction to Lead Mounted on P.C.B. with 0.27" x 0.27" ( 7.0 x 7.0 mm ) Copper Pad Areas.
97