GN1P20_15 Datasheet, PDF (1/4 Pages) GOOD-ARK Electronics – Surface Mount Glass Passivated Standard Rectifier Reverse Voltage 2000V Forward Current 1A

GN1P20
Surface Mount Glass Passivated Standard Rectifier
Reverse Voltage 2000V Forward Current 1A
Features
• Ideal for automated placement
• Glass passivated Standard rectifiers
• High reverse voltage
• High forward surge capability
• Moisture sensitivity: level 1, per J-STD-020
Typical Applications
DO‐214AC(SMA)
• For use of general purpose rectification in lighting, cellular phone, portable device,
power supplies and other consumer applications.
Mechanical Data
• Case:DO-214AC, molded epoxy body，Epoxy meets UL 94V-0 flammability rating
• Terminal:Matte tin plated leads, solderable per J-STD-002 and JESD22B-106
• Polarity:Indicated by cathode band
Maximum Ratings and Electrical Characteristics
(TA = 25 °C unless otherwise noted)
Parameter
Symbol
GN1P20
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward rectified current
Peak forward surge current 8.3 ms single half
sine-wave superimposed on rated load
VRRM
VRMS
VDC
IF(AV)
IFSM
2000
1400
2000
1.0
30.0
Maximum forward voltage at I_F=1.0Amps
V_F
1.1
Maximum DC reverse
current at rated DC blocking ^@Ta=25℃
I_R
5.0
Tylpt ical junction capacitance(Note1)
C_J
5.4
Typical thermal resistance(Note2)
R_θJA
10.0
Operating junction and storage temperature
range
TJ,
TSTG
- 55 to + 150
Notes:1.Measured at 1.0MHz and applied reverse voltage of 4.0 D.C.
2.Thermal resistance from junction to ambient, 8.0×8.0mm copper pads to each terminal
Unit
V
V
V
A
A
Volts
uA
pF
℃/W
°C
www.goodark.com
1/4
2015.04-Rev.A