GL1X_15 Datasheet, PDF (1/3 Pages) GOOD-ARK Electronics – Surface Mount Glass Passivated Junction Rectifier

GL1A thru GL1M
Surface Mount Glass Passivated Junction Rectifier
FEATURES
•
Glass passivated standard rectifiers
•
Ideal for automated placement
•
Low forward voltage drop
•
Low leakage current
•
Meets environmental standard MIL-S-19500D
•
Moisture sensitivity :level 1, per J-STD-020
•
Solder dip 275 °C, 10 s
DO‐213AA
•
Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC
TYPICAL APPLICATIONS
For use in general purpose rectification of lighting, power supplies, inverters, converters and
freewheeling diodes for consumer, automotive and telecommunication.
PRIMARY CHARACTERISTICS
IF(AV)
1A
VRRM
50 V to 1000 V
IFSM
25 A
VF
1.1 V
IR
5.0 µA
TJ max.
150 °C
MECHANICAL DATA
Case: DO-213AA, molded epoxy bodyđEpoxy meets UL 94V-0 flammability rating
Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22B-106
Polarity: One silver ring denotes cathode and the type numbers are noted on the label on the
reel
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL GL1A
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward rectified current at TT =
95 °C
Peak forward surge current 8.3 ms single half
sine-wave superimposed on rated load
Operating junction and storage temperature range
VRRM
50
VRMS
35
VDC
50
IF(AV)
IFSM
TJ, TSTG
GL1B
100
70
100
GL1D GL1G GL1J
200
400
600
140
280
420
200
400
600
1
25
- 55 to + 150
GL1K
800
560
800
GL1M
1000
700
1000
UNIT
V
V
V
A
A
°C
www.goodark.com
1/3
rev.1