GBU6A_15 Datasheet, PDF (1/2 Pages) Rugao Dachang Electronics Co., Ltd – Single-phase Silicon Bridge Rectifier

GBU6A thru GBU6M
Glass Passivated Single-Phase Bridge Rectifiers
Reverse Voltage 50 to 1000 Volts Forward Current 6.0 Amperes
Features
Ideal for printed circuit boards
High surge current capability
High case dielectric strength of 1500 V_RMS
Solder Dip 260 °C, 40 seconds
Mechanical Data
Case: GBU
Epoxy meets UL-94V-0 Flammability rating
Terminals: Matte tin plated (E3 Suffix) leads, solderable per
J-STD-002B and JESD22-B102D
Polarity: As marked on body
Mounting Torque: 10 cm-kg (8.8 inches-lbs) max.
Recommended Torque: 5.7 cm-kg (5 inches-lbs)
Typical Applications
General purpose use in ac-to-dc bridge full wave rectification for
Monitor, TV, Printer, Switching Mode Power Supply, Adapter, Audio
equipment, and Home Appliances applications.
Package outline dimensions in inches (millimeters)
Maximum Ratings and Electrical Characteristics
T_A = 25 ^oC, unless otherwise specified.
Parameter
Symbols GBU6A GBU6B GBU6D GBU6G GBU6J GBU6K GBU6M Units
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward
rectified output current at (Fig.1)
T_C=90^oC ⁽¹⁾
T =25^oC ⁽²⁾
A
Peak forward surge current, 8.3ms single half sine-wave
superimposed on rated load (JEDEC Method)
Rating for fusing (t<8.3ms)
V_RRM
V_RMS
V_DC
I_F(AV)
I_FSM
I²t
50
100
200
400
600
800
1000
35
70
140
280
420
560
700
50
100
200
400
600
800
1000
6.0
3.0
175.0
127
Maximum instantaneous forward voltage drop per leg at 3.0A
Maximum DC reverse current
at rated DC blocking voltage per leg
T_A=25^oC
T_A=125^oC
Typical junction capacitance per leg at 4.0V, 1MHz
Typical thermal resistance per leg
Operating junction and storage temperature range
V_F
I
R
C_J
R ⁽²⁾
θJA
R (1, 3)
θJC
T_J, T_STG
1.0
5.0
500.0
211
94
20
2.5
-55 to +150
Notes:
1. Units case mounted on 11x11x0.15cm thick Al plate heatsink
2. Units mounted in free air, no heatsink on P.C.B., 0.5 x 0.5" (13 x 13 mm) copper pads, 0.375" (9.5 mm) lead length
3. Recommended mounting position is to bolt down on heatsink with silicone thermal compound for maximum heat transfer with #6 screws
442
Volts
Volts
Volts
Amps
Amps
A²sec
Volt
uA
pF
o_C/W
o_C