 English |
|
|
|
|
|
|
|
| GBJ15AU Datasheet, PDF (1/2 Pages) GOOD-ARK Electronics – Glass Passivated Single-Phase Bridge Rectifiers | |||
| |||
|
GBJ15AU thru GBJ15MU
Glass Passivated Single-Phase Bridge Rectifiers
Reverse Voltage 50 to 1000 Volts Forward Current 15.0 Amperes
Features
Thin Single In-Line package
Ideal for printed circuit boards
Glass passivated chip junction
High surge current capability
High case dielectric strength of 2500 VRMS
Plastic package has Underwriters Laboratory Flammability
Classification 94V-0
Mechanical Data
Case: GBJ(5S)
Epoxy meets UL-94V-0 Flammability rating
Terminals: Plated leads solderable per MIL-STD-750,
Method 2026
High temperature soldering guaranteed:
260oC/10 seconds, 0.375 (9.5mm) lead length,
5lbs.(2.3kg) tension
Polarity: As marked on body
Mounting Torque: 10 cm-kg (8.8 inches-lbs) max.
Recommended Torque: 5.7cm-kg (5 inches-lbs)
Typical Applications
General purpose use in ac-to-dc bridge full wave rectification for
Switching Power Supply, Home Appliances, Office Equipment,
Industrial Automation applications
Package outline dimensions in millimeters
Maximum Ratings and Electrical Characteristics
Rating at 25oC ambient temperature unless otherwise specified.
Parameter
Symbols GBJ15AU GBJ15BU GBJ15DU GBJ15GU GBJ15JU GBJ15KU GBJ15MU Units
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward
rectified output current at
TC=107oC
TA=25oC
Peak forward surge current, 8.3ms single half sine-wave
superimposed on rated load (JEDEC Method)
Rating for fusing (t<8.3ms)
VRRM
VRMS
VDC
IF(AV)
IFSM
I2t
50
100
200
400
600
800
1000
35
70
140
280
420
560
700
50
100
200
400
600
800
1000
15 (1)
3.5 (2)
240
240
Maximum instantaneous forward voltage drop per leg at 7.5A
Maximum DC reverse current
at rated DC blocking voltage per leg
TA=25oC
TA=125oC
Typical thermal resistance per leg
Dielectric strength (Therminals to case, AC 1 minute)
Operating junction and storage temperature range
VF
IR
RθJA
RθJC
V
ISO
TJ, TSTG
1.0
5
250
22 (2)
1.5 (1)
2500
-55 to +150
Notes:
1. Unit case mounted on 18.5x18.5x0.15cm thick Al plate heatsink
2. Units mounted on P.C.B. without heatsink
3. Recommended mounting position is to bolt down on heatsink with silicone thermal compound for maximum heat transfer with #6 screw
Volts
Volts
Volts
Amps
Amps
A2sec
Volt
uA
oC/W
Volts
oC
472
|
▷ |
German
Russian
Spanish
Italian
Polish
Chinese
Japanese
Korean
French
Portuguese