FU1 Datasheet, PDF (1/4 Pages) GOOD-ARK Electronics – Surface Mount Glass Passivated Superfast Rectifier

FU1 thru FU5
Surface Mount Glass Passivated Superfast Rectifier
Reverse Voltage 50~600V Forward Current 1A
Features
• Glass passivated superfast recovery Rectifiers
• Very low profile - typical height of 1.0 mm
• Low forward voltage drop
• Low leakage current
• Moisture sensitivity: level 1, per J-STD-020
• AEC-Q101 qualified
• High temperature soldering guaranteed: 260℃/10 seconds
• Halogen-free according to IEC 61249-2-21 definition
eSGA
(SOD-123FL)
Typical Applications
For use of general purpose rectification in lighting, cellular phone, portable device,
power supplies and other consumer applications.
Maximum Ratings (TA = 25 °C unless otherwise noted)
Parameter
Symbol FU1
FU2
FU3
FU4
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward rectified current
VRRM
50
VRMS
35
VDC
50
IF(AV)
Peak forward surge current 8.3 ms single half sine-
wave superimposed on rated load
IFSM
100
200
400
70
140
280
100
200
400
1
30
Operating junction and storage temperature range TJ, TSTG
- 55 to + 150
FU5
Unit
600
V
420
V
600
V
A
A
°C
Electrical Characteristics (TA = 25 °C unless otherwise noted)
Parameter
Test Conditions Symbol FU1
FU2
FU3
FU4
FU5
Unit
Maximum instantaneous
forward voltage
1A
Maximum DC reverse current at TA=25℃
rated DC blocking voltage
TA=125℃
Maximum reverse recovery time ^{IF=0.5A,IR=1.0A,}
I_rr=0.25A
Typical junction capacitance 4.0 V, 1 MHz
Typical thermal resistance¹⁾
juntion to ambient
juntion to case
juntion to mount
V_F
I_R
t_rr
C_J
R_θJA
R_θJC
R_θJM
0.95
1.3
5.0
100
35
0.75
66
32
1
1.7
Volts
µA
nS
pF
℃/W
Note:1),The thermal resistance from junction to ambient,case or mount,mounted on P.C.B with 5×5mm copper pads,2 OZ,FR4 PCB
www.goodark.com
1/4
2013.12-Rev.A