FS2BH Datasheet, PDF (1/4 Pages) GOOD-ARK Electronics – Surface Mount Schottky Rectifier

FS2BH
Surface Mount Schottky Rectifier
Reverse Voltage 100V Forward Current 2A
Features
• Super Low VF Schottky barrier diodes
• Very low profile - typical height of 1.0 mm
• Low forward voltage drop
• Low leakage current
• Moisture sensitivity: level 1, per J-STD-020
• AEC-Q101 qualified
• High temperature soldering guaranteed: 260℃/10 seconds
• Halogen-free according to IEC 61249-2-21 definition
eSGA
(SOD-123FL)
Typical Applications
For use of fast swiching in RF module, lighting, cellular phone, portable device,
power supplies and other consumer applications.
Maximum Ratings (TA = 25 °C unless otherwise noted)
Parameter
Symbol
FS2BH
Unit
Maximum repetitive peak reverse voltage
VRRM
100
V
Maximum RMS voltage
VRMS
70
V
Maximum DC blocking voltage
VDC
100
V
Maximum average forward rectified current
IF(AV)
2.0
A
Peak forward surge current 8.3 ms single half sine-
wave superimposed on rated load
IFSM
50
A
Operating junction temperature range
T_J
- 55 to + 175
°C
Storage temperature range
T_STG
- 55 to + 150
°C
Electrical Characteristics (TA = 25 °C unless otherwise noted)
Parameter
Test Conditions Symbol
FS2BH
Maximum instantaneous
forward voltage
IF=2A,TA=25℃
V_F
0.85
Maximum DC reverse current TA=25℃
at rated DC blocking voltage _TA=125℃
I_R
200
30
Typical junction capacitance 4.0 V, 1 MHz
C_J
71
Typical thermal resistance¹⁾
juntion to ambient R_θJA
95
juntion to mount
R_θJM
35
Note:1),The thermal resistance from junction to ambient,case or mount,mounted on P.C.B with 5×5mm copper pads,2 OZ,FR4 PCB
Unit
Volts
uA
mA
pF
℃/W
www.goodark.com
1/4
2014.12-Rev.A