FR101G_15 Datasheet, PDF (1/2 Pages) SeCoS Halbleitertechnologie GmbH – Glass Passivated Fast Rectifiers

Features
‹ Low forward voltage drop
‹ High current capability
‹ High reliability
‹ High surge current capability
FR101G thru FR107G
Glass Passivated Fast Recovery Rectifiers
Reverse Voltage 50 to 1000 Volts Forward Current 1.0 Ampere
Mechanical Data
‹ Case: Molded plastic DO-204AL (DO-41)/A-405
‹ Epoxy: UL 94V-O rate flame retardant
‹ Lead: Axial leads, solderable per MIL-STD-202, Method 208
guaranteed
‹ Polarity: Color band denotes cathode end
‹ High temperature soldering guaranteed:
250^oC/10 seconds .375” (9.5mm) lead
lengths at 5 lbs., (2.3kg) tension
‹ Weight: DO-41 - 0.012 ounce, 0.335 gram
A-405 - 0.008 ounce, 0.235 gram
Note: Lead diameter is 0.025(0.64)/0.021(0.53) for part numbers from
FR101SG thru FR107SG
Maximum Ratings and Electrical Characteristics
Ratings at 25^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Parameter
Symbols FR101G FR102G FR103G FR104G FR105G FR106G FR107G Units
Maximum repetitive peak reverse voltage
V_RRM
50
100
200
400
600
Maximum RMS voltage
V_RMS
35
70
140
280
420
Maximum DC blocking voltage
Maximum average forward rectified current
0.375" (9.5mm) lead length at T_A=55^oC
Peak forward surge current, 8.3 ms single
half sine-wave superimposed on rated load
(JEDEC Method)
V_DC
50
100
200
400
600
I_(AV)
1.0
I_FSM
30.0
Maximum instantaneous forward voltage @ 1.0A
V_F
Maximum DC reverse current
at rated DC blocking voltage
@T =25oC
A
@T_A=125^oC
I_R
Maximum reverse recovery time (Note 1)
t_rr
1.3
5.0
100
150
250
Typical junction capacitance (Note 2)
C_J
12
Operating junction temperature range
T_J
-55 to +150
Storage temperature range
T_STG
-55 to +150
Notes: 1. Reverse Recovery Test Conditions: I_F=0.5A, I_R=1.0A, I_RR=0.25A
2. Measured at 1 MHz and Applied Reverse Voltage of 4.0 V D.C.
79
800
1000
Volts
560
700
Volts
800
1000
Volts
Amp
Amps
Volts
uA
500
nS
pF
o_C
o_C