FF1S_15 Datasheet, PDF (1/4 Pages) GOOD-ARK Electronics – Surface Mount Glass Passivated Fast Recovery Rectifier

FF1S thru FF7S
Surface Mount Glass Passivated Fast Recovery Rectifier
Reverse Voltage 50~1000V Forward Current 1A
Features
• Glass passivated Fast Recovery rectifiers
• Very low profile - typical height of 1.0 mm
• Low forward voltage drop
• Low leakage current
• Moisture sensitivity: level 1, per J-STD-020
• AEC-Q101 qualified
• High temperature soldering guaranteed: 260℃/10 seconds
• Halogen-free according to IEC 61249-2-21 definition
Typical Applications
eSGA
(SOD‐123FL)
For use of general purpose rectification in lighting, cellular phone, portable device,
power supplies and other consumer applications.
Maximum Ratings (TA = 25 °C unless otherwise noted)
Parameter
Symbol FF1S FF2S FF3S FF4S FF5S FF6S FF7S Unit
Maximum repetitive peak reverse voltage
VRRM
50
100 200 400 600 800 1000
V
Maximum RMS voltage
VRMS 35
70
140 280 420 560 700
V
Maximum DC blocking voltage
VDC
50
100 200 400 600 800 1000
V
Maximum average forward rectified current
IF(AV)
1.0
A
Peak forward surge current 8.3 ms single half sine-
wave superimposed on rated load
IFSM
25
A
Operating junction and storage temperature range TJ, TSTG
- 55 to + 150
°C
Electrical Characteristics (TA = 25 °C unless otherwise noted)
Parameter
Test Conditions Symbol FF1S FF2S FF3S FF4S FF5S FF6S FF7S
Maximum instantaneous
forward voltage
1 A ,TA=25℃
V_F
1.3
Maximum DC reverse current TA=25℃
at rated DC blocking voltage _TA=125℃
I_R
5
50
Maximum reverse recovery
time
I_F=0.5A,I_R=1.0A,
I_rr=0.25A
t_rr
150
250
500
Typical junction capacitance 4.0 V, 1 MHz
C_J
5.4
juntion to ambient R_θJA
70
Typical thermal resistance¹⁾ juntion to case
R_θJC
32
juntion to mount
R_θJM
1
Note:1),The thermal resistance from junction to ambient,case or mount,mounted on P.C.B with 5×5mm copper pads,2 OZ,FR4 PCB
Unit
Volts
µA
nS
pF
℃/W
www.goodark.com
1/4
2014.01-Rev.A