E91307A Datasheet, PDF (1/4 Pages) GOOD-ARK Electronics – Surface Mount Glass Passivated Single Phase Bridge Rectifier

E91307A
Surface Mount Glass Passivated Single Phase Bridge Rectifier
Reverse Voltage 1000V Output Current 3.0A
Features
• Glass passivated Bridge Rectifiers
• Ideal for automated placement
• Very low profile - max height 1.2 mm
• Moisture sensitivity: level 1, per J-STD-020
• High temperature soldering guaranteed: 260℃/10 seconds
Mechanical Data
case: E91
• Case:E91,Molding compound meets UL 94V-0 flammability rating
• Terminals:Matte tin plated leads,solderable per MIl-STD-750 Method 2026,J-STD-002 and JESD22-
B102
Typical Applications
General purpose use in ac-to-dc bridge full wave rectification for TV,Monitor,SMPS,Adapter,
Printer,Audio equipment,and Home Applications application
Maximum Ratings (TA = 25 °C unless otherwise noted)
Parameter
Symbol
E91307A
Unit
Maximum repetitive peak reverse voltage
VRRM
1000
V
Maximum RMS voltage
VRMS
700
V
Maximum DC blocking voltage
VDC
1000
V
Maximum average output rectified current
Io(AV)¹⁾
3.0
A
Io(AV)²⁾
2.5
Peak forward surge current 8.3 ms single half
sine-wave superimposed on rated load
IFSM
95
A
Rating for fusing (t≤8.3ms)
I²t
38
A²s
Operating junction and storage temperature
range
TJ,
TSTG
150
°C
Electrical Characteristics (TA = 25 °C unless otherwise noted)
Parameter
Test Conditions Symbol
Typ.
Instantaneous forward
voltage
IF=1.5A
IF=3.0A
V_F
Maximum DC reverse
TA=25℃
current at rated DC blocking
voltage
TA=125℃
I_R
Typical junction capacitance 4.0 V, 1 MHz
C_J
0.89
0.94
5.0
100
32
Note 1). On glass epoxy PCB, mounted recommended copper pad areas with Al heatsink
2). On glass epoxy PCB, mounted 13*13mm copper pad areas
Max.
1.0
1.1
Unit
Volts
µA
pF
www.goodark.com
1/4
2016.03-Rev.A