E91209A Datasheet, PDF (1/4 Pages) GOOD-ARK Electronics – Surface Mount Glass Passivated Single Phase Bridge Rectifier

E91209A
Surface Mount Glass Passivated Single Phase Bridge Rectifier
Reverse Voltage 1400V Ountput Current 2.0A
Features
• Glass passivated Bridge Rectifiers
• Ideal for automated placement
• Very low profile - max height 1.2 mm
• High surge current capability
• Moisture sensitivity: level 1, per J-STD-020
• High temperature soldering guaranteed: 260℃/10 seconds
Mechanical Data
case: E91
• Case:E91,Molding compound meets UL 94V-0 flammability rating
• Terminals:Matte tin plated leads,solderable per MIl-STD-750 Method 2026,J-STD-002 and JESD22-
B102
Typical Applications
General purpose use in ac-to-dc bridge full wave rectification for TV,Monitor,SMPS,Adapter,
Printer,Audio equipment,and Home Applications application
Maximum Ratings (TA = 25 °C unless otherwise noted)
Parameter
Symbol
E91209A
Unit
Maximum repetitive peak reverse voltage
VRRM
1400
V
Maximum RMS voltage
VRMS
980
V
Maximum DC blocking voltage
VDC
1400
V
Maximum average output rectified current
Io(AV)
2.0
A
Peak forward surge current 8.3 ms single half
sine-wave superimposed on rated load
IFSM
55
A
Rating for fusing (t≤8.3ms)
I²t
13
A²s
Operating junction and storage temperature range ^TJ,
TSTG
150
°C
Electrical Characteristics (TA = 25 °C unless otherwise noted)
Parameter
Test Conditions Symbol
E91209A
Unit
Maximum instantaneous
forward voltage
IF=1.0A
IF=2.0A
V_F
Maximum DC reverse
TA=25℃
current at rated DC blocking
voltage
TA=125℃
I_R
Typical junction capacitance 4.0 V, 1 MHz
C_J
1.0
Volts
1.1
5.0
µA
100
15
pF
www.goodark.com
1/4
2015.12-Rev.A