E91207R Datasheet, PDF (1/4 Pages) GOOD-ARK Electronics – Surface Mount Glass Passivated Single Phase Bridge Rectifier

E91207R
Surface Mount Glass Passivated Single Phase Bridge Rectifier
Reverse Voltage 1000V Output Current 2.0A
Features
• Glass passivated fast recovery bridge rectifiers
• Ideal for automated placement
• Very low profile - max height 1.2 mm
• High surge current capability
• Moisture sensitivity: level 1, per J-STD-020
• High temperature soldering guaranteed: 260℃/10 seconds
• Low forward voltage drop
Mechanical Data
case: E91
• Case:E91,Molding compound meets UL 94V-0 flammability rating
• Terminals:Matte tin plated leads,solderable per MIl-STD-750 Method 2026,J-STD-002 and
JESD22-B102
Typical Applications
General purpose use in ac-to-dc bridge full wave rectification for TV,Monitor,SMPS,Adapter,
Printer,Audio equipment,and Home Applications application
Maximum Ratings (TA = 25 °C unless otherwise noted)
Parameter
Symbol
E91207R
Unit
Maximum repetitive peak reverse voltage
VRRM
1000
V
Maximum RMS voltage
VRMS
700
V
Maximum DC blocking voltage
VDC
1000
V
Maximum average output rectified current
Io(AV)
2.0
A
Peak forward surge current 8.3 ms single half
sine-wave superimposed on rated load
IFSM
85
A
Rating for fusing (t≤8.3ms)
I²t
30
A²s
Operating junction and storage temperature range ^TJ,
TSTG
150
°C
Electrical Characteristics (TA = 25 °C unless otherwise noted)
Parameter
Test Conditions Symbol
E91207R
Unit
Maximum instantaneous
forward voltage
IF=1A
IF=2A
V_F
Maximum DC reverse
TA=25℃
current at rated DC blocking
voltage
TA=125℃
I_R
Typical reverse recovery
time
I_F=0.5A,I_R=1.0A,
I_rr=0.25A
t_rr
Typical junction capacitance 4.0 V, 1 MHz
C_J
1.1
Volts
1.3
5.0
µA
100
250
nS
22
pF
www.goodark.com
1/4
2015.12-Rev.A