E91108H Datasheet, PDF (1/4 Pages) GOOD-ARK Electronics – Surface Mount Glass Passivated Single Phase Bridge Rectifier

E91108H
Surface Mount Glass Passivated Single Phase Bridge Rectifier
Reverse Voltage 1200V Output Current 1.0A
Features
• Glass passivated High Efficient Bridge Rectifiers
• Ideal for automated placement
• Very low profile - max height 1.2 mm
• Moisture sensitivity: level 1, per J-STD-020
• High temperature soldering guaranteed: 260
℃/10 seconds
Mechanical Data
case: E91
• Case:E91,Molding compound meets UL 94V-0 flammability rating
• Terminals:Matte tin plated leads,solderable per MIl-STD-750 Method 2026,J-STD-002 and
JESD22-B102
Typical Applications
General purpose use in ac-to-dc bridge full wave rectification for TV,Monitor,SMPS,Adapter,
Printer,Audio equipment,and Home Applications application
Maximum Ratings (TA = 25 °C unless otherwise noted)
Parameter
Symbol
E91108H
Unit
Maximum repetitive peak reverse voltage
VRRM
1200
V
Maximum RMS voltage
VRMS
840
V
Maximum DC blocking voltage
VDC
1200
V
Maximum average output rectified current
Io(AV)
1.0
A
Peak forward surge current 8.3 ms single half
sine-wave superimposed on rated load
IFSM
35
A
Rating for fusing (t≤8.3ms)
Operating junction and storage temperature
range
I²t
TJ,
TSTG
5
A²s
150
°C
Electrical Characteristics (TA = 25 °C unless otherwise noted)
Parameter
Test Conditions Symbol
E91108H
Unit
Maximum instantaneous
forward voltage
IF=0.5A
IF=1A
V_F
1.3
1.7
Maximum DC reverse
TA=25℃
5.0
current at rated DC blocking
I_R
voltage
TA=125℃
250
Maximum reverse recovery ^IF^=0.5A,IR^=1.0A,
time
I_rr=0.25A
t_rr
75
Typical junction capacitance 4.0 V, 1 MHz
C_J
11
Typical thermal resistance^{1) juntion to ambient RθJA}
45
juntion to case
R_θJC
12.6
Note:1), The thermal resistance from junction to ambient and case, mounted on glass epoxy FR-4 P.C.B with recommended copper pads
Volt
s
µA
nS
pF
℃/W
www.goodark.com
1/4
2015.12-Rev.A