DFL5BS_15 Datasheet, PDF (1/4 Pages) GOOD-ARK Electronics – Surface Mount Schottky Bridge Rectifier Reverse Voltage 100V Ountput Current 5A

DFL5BS
Surface Mount Schottky Bridge Rectifier
Reverse Voltage 100V Ountput Current 5A
Features
• Low VF Schottky barrier diodes
• Ideal for automated placement
• Very low profile - typical height of 1.9 mm
• High surge current capability
• Moisture sensitivity: level 1, per J-STD-020
• High temperature soldering guaranteed: 260℃/10 seconds
• Polarity:As marked on body
Mechanical Data
DFL
• Case:DFL,Molding compound meets UL 94V-0 flammability rating
• Weight:0.3435g
Typical Applications
General purpose use in ac-to dc bridge full wave rectification for
SMPS,lighting,adapter,charger,home appliances,office equipment,and telecommunication
applications
Maximum Ratings (TA = 25 °C unless otherwise noted)
Parameter
Symbol
DFL5BS
Unit
Maximum repetitive peak reverse voltage
VRRM
100
V
Maximum RMS voltage
VRMS
70
V
Maximum DC blocking voltage
VDC
100
V
Maximum average output rectified current
Io(AV)
5.0
A
Peak forward surge current 8.3 ms single half sine-
wave superimposed on rated load
IFSM
150
A
Rating for fusing (t≤8.3ms)
I²t
90
A²s
Operating junction and storage temperature range TJ, TSTG
- 55 to + 150
°C
Electrical Characteristics (TA = 25 °C unless otherwise noted)
Parameter
Test Conditions Symbol
DFL5BS
Unit
Maximum instantaneous forward
voltage
IF=2.5 A
V_F
Maximum DC reverse current at TA=25℃
rated DC blocking voltage
TA=125℃
I_R
Typical junction capacitance
4.0 V, 1 MHz
C_J
0.85
Volts
0.5
mA
100
213
pF
www.goodark.com
1/4
2014.02-Rev.A