DFL3005_15 Datasheet, PDF (1/4 Pages) GOOD-ARK Electronics – Surface Mount Glass Passivated Single Phase Bridge Rectifier Reverse Voltage 50~1000V Ountput Current 3A

DFL3005 thru DFL310
Surface Mount Glass Passivated Single Phase Bridge Rectifier
Reverse Voltage 50~1000V Ountput Current 3A
Features
• Glass passivated Bridge Rectifiers
• Ideal for automated placement
• Very low profile - typical height of 1.9 mm
• High surge current capability
• Moisture sensitivity: level 1, per J-STD-020
• High temperature soldering guaranteed: 260℃/10 seconds
• Polarity:As marked on body
Mechanical Data
DFL
• Case:DFL,Molding compound meets UL 94V-0 flammability rating
• Weight:0.3435g
Typical Applications
General purpose use in ac-to dc bridge full wave rectification for
SMPS,lighting,adapter,charger,home appliances,office equipment,and telecommunication
applications
Maximum Ratings (TA = 25 °C unless otherwise noted)
Parameter
Symbol DFL3005 DFL301 DFL302 DFL304 DFL306 DFL308 DFL310 Unit
Maximum repetitive peak reverse voltage VRRM 50
Maximum RMS voltage
VRMS 35
Maximum DC blocking voltage
VDC
50
Maximum average output rectified current Io(AV)
Peak forward surge current 8.3 ms single
half sine-wave superimposed on rated
load
IFSM
Rating for fusing (t≤8.3ms)
I²t
Operating junction and storage
TJ,
temperature range
TSTG
100
200
400 600 800 1000 V
70
140
280
420
560
700 V
100
200
400 600 800 1000 V
3.0
A
60
A
15
A²s
- 55 to + 150
°C
Electrical Characteristics (TA = 25 °C unless otherwise noted)
Parameter
Test Conditions Symbol DFL3005 DFL301 DFL302 DFL304 DFL306 DFL308 DFL310 Unit
Maximum instantaneous
forward voltage
IF=1.5A
V_F
Maximum DC reverse ^TA=25℃
current at rated DC
blocking voltage
TA=125℃
I_R
Typical junction
capacitance
4.0 V, 1 MHz
C_J
1.1
Volts
5
µA
100
21
pF
www.goodark.com
1/4
2014.02-Rev.A