DFL2005_15 Datasheet, PDF (1/4 Pages) GOOD-ARK Electronics – Surface Mount Glass Passivated Single Phase Bridge Rectifier Reverse Voltage 50~1000V Ountput Current 2A

DFL2005 thru DFL210
Surface Mount Glass Passivated Single Phase Bridge Rectifier
Reverse Voltage 50~1000V Ountput Current 2A
Features
• Glass passivated Bridge Rectifiers
• Ideal for automated placement
• Very low profile - typical height of 1.9 mm
• High surge current capability
• Moisture sensitivity: level 1, per J-STD-020
• High temperature soldering guaranteed: 260℃/10 seconds
• Polarity:As marked on body
Mechanical Data
DFL
• Case:DFL,Molding compound meets UL 94V-0 flammability rating
• Weight:0.3435g
Typical Applications
General purpose use in ac-to dc bridge full wave rectification for SMPS,lighting,adapter,charger,home
appliances,office equipment,and telecommunication applications
Maximum Ratings (TA = 25 °C unless otherwise noted)
Parameter
Symbol DFL2005 DFL201 DFL202 DFL204 DFL206 DFL208 DFL210 Unit
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average output rectified current
VRRM 50
VRMS 35
VDC
50
Io(AV)
100
200
400
600 800 1000 V
70
140
280
420
560 700 V
100
200
400
600 800 1000 V
2.0
A
Peak forward surge current 8.3 ms single half
sine-wave superimposed on rated load
IFSM
50
A
Rating for fusing (t≤8.3ms)
Operating junction and storage temperature
range
I²t
TJ,
TSTG
10
A²s
- 55 to + 150
°C
Electrical Characteristics (TA = 25 °C unless otherwise noted)
Parameter
Test Conditions Symbol DFL2005 DFL201 DFL202 DFL204 DFL206 DFL208 DFL210 Unit
Maximum instantaneous
forward voltage
IF=1A
V_F
Maximum DC reverse
TA=25℃
current at rated DC
blocking voltage
TA=125℃
I_R
Typical junction
it
4.0 V, 1 MHz
C_J
1.1
Volts
5
µA
100
21
pF
www.goodark.com
1/4
2014.02-Rev.A