DFL1005_15 Datasheet, PDF (1/4 Pages) GOOD-ARK Electronics – Surface Mount Glass Passivated Single Phase Bridge Rectifier Reverse Voltage 50~1000V Ountput Current 1A

DFL1005 thru DFL110
Surface Mount Glass Passivated Single Phase Bridge Rectifier
Reverse Voltage 50~1000V Ountput Current 1A
Features
• Glass passivated Standard Rectifiers
• Ideal for automated placement
• Very low profile - typical height of 1.9 mm
• High surge current capability
• Moisture sensitivity: level 1, per J-STD-020
• High temperature soldering guaranteed: 260℃/10 seconds
• Polarity:As marked on body
Mechanical Data
DFL
• Case:DFL,Molding compound meets UL 94V-0 flammability rating
• Weight:0.3435g
Typical Applications
General purpose use in ac-to dc bridge full wave rectification for SMPS,lighting,adapter,charger,home
appliances,office equipment,and telecommunication applications
Maximum Ratings (TA = 25 °C unless otherwise noted)
Parameter
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average output rectified current
Peak forward surge current 8.3 ms single half
sine-wave superimposed on rated load
Rating for fusing (t≤8.3ms)
Operating junction and storage temperature
range
Symbol DFL1005 DFL101 DFL102 DFL104 DFL106 DFL108 DFL110 Unit
VRRM 50
VRMS 35
VDC
50
Io(AV)
100 200 400 600 800 1000 V
70
140 280 420 560 700 V
100 200 400 600 800 1000 V
1.0
A
IFSM
40
A
I²t
TJ,
TSTG
6
A²s
- 55 to + 150
°C
Electrical Characteristics (TA = 25 °C unless otherwise noted)
Parameter
Test Conditions Symbol DFL1005 DFL101 DFL102 DFL104 DFL106 DFL108 DFL110 Unit
Maximum instantaneous
forward voltage
IF=0.5 A
V_F
Maximum DC reverse current ^TA=25℃
at rated DC blocking voltage _TA=125℃
I_R
Typical junction capacitance 4.0 V, 1 MHz
C_J
1.0
V
5
µA
100
9
pF
www.goodark.com
1/4
2014.02-Rev.A