DF005S Datasheet, PDF (1/2 Pages) Won-Top Electronics – 1.0A SURFACE MOUNT GLASS PASSIVATED BRIDGE RECTIFIER

DF005S thru DF10S
Features
Ideal for printed circuit boards
Applicable for automative insertion
High surge current capability
Solder Dip 260 ^oC, 40 seconds
Miniature Glass Passivated Single-Phase Surface Mount Bridge Rectifiers
Reverse Voltage 50 to 1000 Volts Forward Current 1.0 Ampere
Mechanical Data
Case: DFS
Epoxy meets UL-94V-0 Flammability rating
Terminals: Matte tin plated (E3 Suffix) leads, solderable per
J-STD-002B and JESD22-B102D
Polarity: As marked on body
Typical Applications
General purpose use in ac-to-dc bridge full wave rectification for
SMPS, Lighting Ballaster, Adapter, Battery Charger, Home
Appliances, Office Equipment, and Telecommunication applications
Maximum Ratings and Electrical Characteristics
(T_A=25^oC unless otherwise noted)
Parameter
Symbols
DF005S
DBS101
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward output rectified current
at T_A=40^oC (Note 2)
Peak forward surge current single half sine-wave
superimposed on rated load (JEDEC Method)
Rating for fusing (t < 8.3ms)
V_RRM
50
V_RMS
35
V_DC
50
I_F(AV)
I_FSM
I²t
Maximum instantaneous forward voltage drop per leg at 0.5A
Maximum DC reverse current
T_A=25^oC
at rated DC blocking voltage per leg T_A=125^oC
Typical junction capacitance per leg (Note 1)
Typical thermal resistance per leg (Note 2)
Operating junction and storage temperature range
V_F
I_R
C_J
R_θJA
R_θJL
T_J, T_STG
Notes: 1. Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts
2. Units mounted on P.C.B. with 0.51 x 0.51" (13 x 13mm) copper pads
DF01S DF02S DF04S DF06S DF08S DF10S
DBS102 DBS103 DBS104 DBS105 DBS106 DBS107
100
200
400
600
800
1000
70
140
280
420
560
700
100
200
400
600
800
1000
1.0
50.0
10
1.1
5.0
500
25
40
15
-55 to +150
Units
Volts
Volts
Volts
Amp
Amps
A²sec
Volts
uA
pF
o_C/W
o_C
424