A1_15 Datasheet, PDF (1/4 Pages) GOOD-ARK Electronics – Surface Mount Glass Passivated Standard RectifierReverse Voltage 50~1000V Forward Current 1A

A1 thru A7
Surface Mount Glass Passivated Standard Rectifier
Reverse Voltage 50~1000V Forward Current 1A
Features
• Glass passivated Standard Rectifiers
• Very low profile - typical height of 1.0 mm
• Low forward voltage drop
• Low leakage current
• Moisture sensitivity: level 1, per J-STD-020
• AEC-Q101 qualified
• High temperature soldering guaranteed: 260℃/10 seconds
• Halogen-free according to IEC 61249-2-21 definition
eSGA
(SOD‐123FL)
Typical Applications
For use of general purpose rectification in lighting, cellular phone, portable device,
power supplies and other consumer applications.
Maximum Ratings (TA = 25 °C unless otherwise noted)
Parameter
Symbol A1 A2 A3 A4 A5 A6 A7 Unit
Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 V
Maximum RMS voltage
VRMS 35 70 140 280 420 560 700 V
Maximum DC blocking voltage
VDC 50 100 200 400 600 800 1000 V
Maximum average forward rectified current IF(AV)
1.0
A
Peak forward surge current 8.3 ms single
half sine-wave superimposed on rated load ^IFSM
40
A
Operating junction and storage temperature TJ,
range
TSTG
- 55 to + 150
°C
Electrical Characteristics (TA = 25 °C unless otherwise noted)
Parameter
Test Conditions Symbol A1 A2 A3 A4 A5 A6 A7 Unit
Maximum
instantaneous forward 1 A
V_F
voltage
Maximum DC reverse ^TA=25℃
current at rated DC
blocking voltage
TA=125℃
I_R
1.0
Volts
5
µA
50
Typical reverse
recovery time
I_F=0.5A,I_R=1.0A,
I_rr=0.25A
t_rr
1.8
uS
Typical junction
capacitance
4.0 V, 1 MHz
C_J
6
pF
Typical thermal
resistance¹⁾
juntion to ambient
juntion to case
juntion to mount
R_θJA
R_θJC
R_θJM
70
40
℃/W
5
Note 1),The thermal resistance from junction to ambient,case or mount,mounted on P.C.B with 5×5mm copper pads,2 OZ,FR4 PCB
www.goodark.com
1/4
2014.03-Rev.A