A1S Datasheet, PDF (1/4 Pages) GOOD-ARK Electronics – Surface Mount Glass Passivated Standard Rectifier

A1S thru A7S
Surface Mount Glass Passivated Standard Rectifier
Reverse Voltage 50~1000V Forward Current 1A
Features
• Glass passivated Standard Rectifiers
• Very low profile - typical height of 1.0 mm
• Low forward voltage drop
• Low leakage current
• Moisture sensitivity: level 1, per J-STD-020
• AEC-Q101 qualified
• High temperature soldering guaranteed: 260℃/10 seconds
• Halogen-free according to IEC 61249-2-21 definition
Typical Applications
eSGA
(SOD‐123FL)
For use of general purpose rectification in lighting, cellular phone, portable device,
power supplies and other consumer applications.
Maximum Ratings (TA = 25 °C unless otherwise noted)
Parameter
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward rectified current at TL
(See Fig.1)
Peak forward surge current 8.3 ms single half sine-
wave superimposed on rated load
Operating junction and storage temperature range
Symbol A1S A2S A3S A4S A5S A6S A7S Unit
VRRM 50 100 200 400 600 800 1000 V
VRMS 35 70 140 280 420 560 700 V
VDC
50 100 200 400 600 800 1000 V
IF(AV)
1.0
A
IFSM
50
A
TJ, TSTG
- 55 to + 150
°C
Electrical Characteristics (TA = 25 °C unless otherwise noted)
Parameter
Test Conditions Symbol A1S A2S A3S A4S A5S A6S A7S Unit
Maximum instantaneous forward
voltage
1A
V_F
1.1
Maximum DC reverse current at TA=25℃
rated DC blocking voltage
TA=125℃
I_R
5
500
Typical reverse recovery time
I_F=0.5A,I_R=1.0A,
I_rr=0.25A
t_rr
1.8
Typical junction capacitance
4.0 V, 1 MHz
C_J
6
juntion to ambient R_θJA
63
Typical thermal resistance¹⁾
juntion to case
R_θJC
22
juntion to mount
R_θJM
2
Note:1),The thermal resistance from junction to ambient,case or mount,mounted on P.C.B with 5×5mm copper pads,2 OZ,FR4 PCB
Volts
µA
uS
pF
℃/W
www.goodark.com
1/4
2014.08-Rev.A