HCD220 Datasheet, PDF (1/1 Pages) Golledge Electronics Ltd – OCXO Sine Output

OCXO Sine Output
HCD220
Optional SMA/B/C/BNC/MCX
RF connector(s)
10.00
15.00
1
9
50.00
17.00
40.00
70.00
A
A
Fixing holes M3 tapped.
Penetration 5mm max.
15.90
PIN CONNECTION
1 Freq adjust (+ve)
2 Fine adjust
3 Freq adjust (-ve)
4 Isolated RF output
5 Isolated RF output
6 + Supply
7 DO NOT USE
8 - Supply
9 Case
A
A
15.90
5.90
5.90
Mechanical frequency
adjustment on this face
Features
« Temperature stability down to 1ppb
« Twin RF outputs available
« Oven alarm option on D9 connector
« Custom options available
Scale 1:2
Standard Models
Freq
Specification Ageing
per day
5.0MHz
5.0MHz
10.0MHz
10.0MHz
HCD220/DRFND ±1x10^-9
HCD220/FTFND ±2x10^-10
HCD220/DRFNA ±1x10^-9
HCD220/FTFNA ±2x10^-10
Temperature
stability
±1x10^-8 -20+70°C
±3x10^-9 -20+70°C
±1x10^-8 -20+70°C
±3x10^-9 -20+70°C
Part No
MA05197
MA05621
MA05622
MA01842
Ordering Information
Product name + option code + frequency
eg: HCD220/DRFND 10.0MHz
HCD220/FTFNA 5.0MHz
Option code X (eg HCD220/X) denotes a custom specification.
Specifications
Parameters
Frequency range: 5.0 ~ 16.0MHz
Product
HCD220
࡯
Ageing per day (at despatch):
< ±1x10^-9
࡯
< ±2x10^-10
࡯
< ±1x10^-10 (<10MHz only)
Ë¿
Frequency stability:
< ±2x10^-8 per year
࡯
< ±1x10^-9 per 10% change in V_DD
࡯
< ±5x10^-10 per 10% change in load
࡯
Short term stability:
< ±5x10^-12 over 1 sec (5.0MHz)
࡯
< ±1x10^-11 over 1 sec (10.0MHz)
࡯
Temperature stability: < ±1x10^-8
࡯
< ±5x10^-9
Ë¿
< ±3x10^-9
࡯
< ±1x10^-9
Ë¿
Operating temperature range:
0 to +50°C
Ë¿
-10 to +60°C
Ë¿
-20 to +70°C
࡯
-40 to +70°C
Ë¿
Storage temperature range:
-40 to +90°C
࡯
Output waveform:
Sine wave, 7dBm (±1dBm) into 50⏲
࡯
Other options from 3 to +13dBm
Ë¿
Frequency adjustment:
±5x10^-7 (typ) over +0.5 to +8V
࡯
(sufficient for 10 years ageing min)
Stabilised +8V supply provided
Mechanical ±5x10^-7
࡯
Supply voltage (V_DD):
+12V (±0.5V)
࡯
+24V (±0.5V)
࡯
Other options from 12~30V
Ë¿
Power consumption:
5.0W max at switch on
࡯
2.0W typ when stabilised at 25°C
࡯
Warm up:
< ±1x10^-8 after 12mins at +25°C
࡯
Phase noise (@ 10.0MHz):
< -130 dBc/Hz @ 10Hz
࡯
< -140 dBc/Hz @ 100Hz
࡯
< -155 dBc/Hz @ 1kHz
࡯
< -158 dBc/Hz @ 10kHz
࡯
< -160 dBc/Hz @ 50kHz
࡯
External connectors:
D9
࡯
D9 + single SMA
Ë¿
D9 + twin SMA
Ë¿
Other (BNC, single or twin SMB/C/MCX)
Ë¿
Harmonics: < -30dB wrt carrier
࡯
Shock:
IEC 68-2-27 Test Ea
50G for 11ms
࡯
Vibration:
IEC 68-2-06 Test Fc
10-55Hz, 1.5mm. 55-500Hz, 10G
࡯
࡯ Standard. ˿ Optional - Please specify required codes when ordering
Option
Codes
D
F
G
R
S
T
V
A
C
F
G
specify
N
T
specify
D
A
G
specify
Tel: [phone]
04 Mar 2004
Fax: [phone]
E-mail: [e-mail]
Web: www.golledge.com