HCD210 Datasheet, PDF (1/1 Pages) Golledge Electronics Ltd – OCXO Sine Output

OCXO Sine Output
HCD210
Optional SMA/B/C/BNC/MCX
RF connector
10.00
15.00
1
9
50.00
70.00
A
A
Fixing holes M3 tapped.
Penetration 5mm max.
40.00
15.90
PIN CONNECTION
1 Freq adjust (+ve)
2 Fine adjust
3 Freq adjust (-ve)
4 Isolated RF output
5 Isolated RF output
6 + Supply
7 DO NOT USE
8 - Supply
9 Case
A
A
15.90
5.90
5.90
Mechanical frequency
adjustment on this face
Scale 1:2
Features
« Frequencies up to 100MHz
« Internal multiplier above 50.0MHz
« Single oven & oscillator supply
« 12V supply standard, 15V or 18V optional
« Custom options available
Specifications
Parameters
Frequency range: 5.0 ~ 100.0MHz
Product
HCD210
࡯
Ageing per day (at despatch):
< ±1x10^-8
Ë¿
< ±5x10^-9
࡯
Frequency stability:
< ±5x10^-7 per year
࡯
< ±1x10^-7 per 5% change in V_DD
࡯
< ±5x10^-10 per 10% change in load
࡯
Short term stability:
< ±5x10^-12 over 1 sec (5.0MHz)
࡯
< ±1x10^-11 over 1 sec (10.0MHz)
࡯
Temperature stability: < ±1x10^-7
Ë¿
< ±5x10^-8
࡯
Operating temperature range:
0 to +50°C
Ë¿
-20 to +60°C
࡯
-20 to +70°C
Ë¿
Storage temperature range:
-40 to +90°C
࡯
Output waveform:
Sine wave, 1.5V p-p ±0.5V into 50⏲
࡯
Frequency adjustment:
±2x10^-6 (typ) over +0.5 to +6.0V
࡯
(sufficient for 10 years ageing min)
Stabilised +6.0V supply provided
Mechanical ±5x10^-7
࡯
Supply voltage (V_DD):
+12V (±0.5V)
࡯
+15V (±0.5V)
Ë¿
+18V (±0.5V)
Ë¿
Power consumption:
4.5W max at switch on
࡯
1.0W typ when stabilised at 25°C
࡯
Warm up:
< ±5x10^-8 after 10mins at +25°C
࡯
Phase noise (@ 10.0MHz):
< -110 dBc/Hz @ 10Hz
࡯
< -130 dBc/Hz @ 100Hz
࡯
< -145 dBc/Hz @ 1kHz
࡯
< -150 dBc/Hz @ 10kHz
࡯
< -150 dBc/Hz @ 50kHz
࡯
External connectors:
D9
࡯
D9 + single SMA
Ë¿
D9 + single SMB
Ë¿
Other (single SMC/BNC/MCX)
Ë¿
Harmonics: < -30dB wrt carrier
࡯
Shock:
IEC 68-2-27 Test Ea
50G for 11ms
࡯
Vibration:
IEC 68-2-06 Test Fc
10-55Hz, 1.5mm. 55-500Hz, 10G
࡯
࡯ Standard. ˿ Optional - Please specify required code(s) when ordering
Option
Codes
A
B
M
N
A
D
F
N
P
R
D
A
B
specify
Ordering Information
Product name + option codes (if any) + frequency
eg: HCD210 10.0MHz
Option code X (eg HCD210/X) denotes a custom specification.
Tel: [phone]
30 Jun 2004
Fax: [phone]
E-mail: [e-mail]
Web: www.golledge.com