EVG2995 Datasheet, PDF (2/4 Pages) Global Mixed-mode Technology Inc – G2995 Evaluation Board Manual

Global Mixed-mode Technology
EV2995-10
Performance
The following series of scope plots shows the performance of the G2996 evaluation board when it is subjected
to various load tests. On each of the six scope plots there are two traces. The upper trace is the VTT output
voltage that has been AC coupled with a scale of 20mV per division. The lower trace is the output current with
a scale of 500mA per division. All the load transients begin from an initial condition of zero current and show
magnitude. Please refer to the title to determine whether the current flow is into (sinking) or out from (sourcing)
the VTT pin. The time scale for all the plots is 2mS per division.
ILoad=0.5A Transient(Sinking)
ILoad=0.5A Transient(Sourcing)
ILoad=1A Transient (Sinking)
ILoad=1A Transient(Sourcing)
ILoad=1.5A Transient (Sinking)
ILoad=1.5A Transient(Sourcing)
Mar 12, 2003
TEL: [phone]
http://www.gmt.com.tw
2