G5806 Datasheet, PDF (1/1 Pages) Global Mixed-mode Technology Inc – Single Cell Li-Ion Battery Linear Charger

Global Mixed-mode Technology Inc.
G5806
Single Cell Li-Ion Battery Linear Charger
Features
„ No External Power MOSFET, Sense Resistor or
Blocking Diode Required
„ 1% Regulation Voltage Accuracy
„ Programmable Constant Charge Current Limit
up to 800mA
„ Automatic Recharge
„ Complete Pre-Charge, Constant Current,
Constant Voltage and Charge Termination
Charge Procedure
„ Support for 5V Power Supply Voltage
„ Internal Input Overvoltage Lockout Protection
Circuit (VIN >6.5V)
„ Internal Thermal Protection Circuit
„ TSOT-23-5 Package
Applications
„ MP3 Players
„ Cellular Phones
„ PDAs
„ Hand-Held Devices
General Description
The G5806 is a standalone linear Li-Ion battery
charger with a complete pre-charge, constant-current
and constant-voltage charge loop.
No external power MOSFET, sense resistor and block-
ing diode is required due to internal power MOSFET
architecture. The charge voltage is regulated at 4.2V,
and the charge current is programmable by an exter-
nal resistor. After the final regulation voltage is
reached and the charge current drops to 1/10^th the
programmed charge current, the open drain NMOS
CHRG pin would be turn off automatically without
terminating the charge loop.
Other features include under voltage lockout, auto-
matic recharge, over temperature protection and a
charge status indication pin.
Ordering Information
ORDER
NUMBER
G5806TO1U
Note: TO: TSOT-23-5
1: Bonding Code
U: Tape & Reel
Pin Configuration
MARKING
5806x
PROG 1
G5806
5 VIN
GND 2
CHRG 3
4 BAT
TSOT-23-5
TEMP. RANGE
-40°C ~ +85°C
PACKAGE
(Pb free)
TSOT-23-5
Typical Application Circuit
500mA Single Cell Li-Ion Charger
V_IN
V _IN
4.5V to 6.5V
1 µF
G5806
VIN
CHRG
30 0Ω
L ED
1 .5 Ω*
BA T
GND ^PROG
Li-lo n
Battery
2k
*1.5Ω resistor in series with a cera mic capacitor wil l
minimize th e start-up volta ge overshoot tra nsien ts
Ver: 0.3
Oct 31, 2008
TEL: [phone]
http://www.gmt.com.tw
1