G5016 Datasheet, PDF (1/1 Pages) Global Mixed-mode Technology Inc – Dual Ultra-Low On-Resistance Load Switch with Controlled Turn-On

Global Mixed-mode Technology
G5016
Dual Ultra-Low On-Resistance Load Switch
with Controlled Turn-On
Features
„ Integrated Dual Channel Load Switch
„ Input Voltage Range: 0.8V to 5.5V
„ Dual Ultra-low ON-Resistance (16mΩ)
„ 6A Continuous Switch Current per channel
„ Low Threshold Control Inputs
„ Adjustable Slew-rate Control
„ Quick Output Discharge Transistor
„ 14 Pin TDFN Package with Thermal Pad
Applications
„ Notebooks / Netbooks
„ Tablet PCs
„ Consumer Electronics
„ Set-Top-Boxes
„ Industrial Systems
„ Telecom Systems
Ordering Information
ORDER
NUMBER
G5016KD1U
Note: KD: TDFN2X3-14
1: Bonding Code
U: Tape & Reel
Pin Configuration
MARKING
5016
General Description
The G5016 is dual N-channel MOSFET power switch
designed for high-side load-switching applications, and
the device has a typical R_DS(ON) of 16mΩ and the out-
put current is limited to 6A. Each switch is independ-
ently controlled by an on/off input (EN1, EN2), which is
capable of interfacing directly with low-voltage GPIO
control signals.
In the G5016, a 250Ω on-chip load resistor is added
for quick output discharge (QOD) when the switch is
turned off. The rise time of the device is internally con-
trolled in order to avoid in-rush current and can be
adjusted using a ceramic capacitor on the CTx pins.
The G5016 is available in 14 pin TDFN package.
TEMP.
RANGE
-40°C to 85°C
PACKAGE
(Green)
TDFN2X3-14
Typical Application Circuit
G5016
IN1 1
14 OUT1
IN1 2
13 ^OUT1
EN1 3
12 CT1
VBIAS 4
11 GND
EN2 5
10 CT2
IN2 6
9 OUT2
IN2 ₇
8 ^OUT2
TDFN2x3-14
CT1
EN1
EN2
VBIAS
1uF
CT2
VIN1
IN1
10uF
control
driver
Charge
pump
driver
OUT1
GND
OUT2
IN2
VIN2
10uF
Ver: 0.1
Aug 01, 2013
TEL: [phone]
http://www.gmt.com.tw
1