G5010 Datasheet, PDF (1/1 Pages) Global Mixed-mode Technology Inc – Dual-Low On-Resistance Load Switch with Controlled Turn-On

Global Mixed-mode Technology
G5010
Dual-Low On-Resistance Load Switch
with Controlled Turn-On
Features
„ Integrated Dual Channel Load Switch
„ Input Voltage Range: 0.8-V to 5.5V
„ Dual Ultra-low ON-Resistance (10mΩ)
„ 6A Continuous Switch Current per channel
„ Low Threshold Control Inputs
„ Adjustable Slew-rate Control
„ Quick Output Discharge Transistor
„ 10 Pin AQFN Package
Applications
„ Notebooks / Netbooks
„ Tablet PCs
„ Consumer Electronics
„ Set-Top-Boxes
„ Industrial Systems
„ Telecom Systems
General Description
The G5010 is dual N-channel MOSFET power switch
designed for high-sideload-switching applications, and
the device has a typical R_DS(ON) of 10m and the output
current is limited to 6A. Each switch is independently
controlled by an on/off input (EN1, EN2), which is ca-
pable of interfacing directly with low-voltage GPIO
control signals.
In the G5010, a 320Ω on-chip load resistor is added
for quick output discharge (QOD) when the switch is
turned off. The rise time of the device is internally con-
trolled in order to avoid in-rush current and can be
adjusted using a ceramic capacitor on the CTx pins.
The G5010 is available in 10 pin AQFN package.
Ordering Information
ORDER
NUMBER
G5010AC1U
Note: AC: AQFN2X2-10
1: Bonding Code
U: Tape & Reel
Pin Configuration
MARKING
5010
G5010
EN2
VBIAS
GND
EN1
10
9
8
7
CT2
1
OUT2
2
6
CT1
5
OUT1
IN2
3
4
IN1
AQFN2X2-10
TEMP.
RANGE
-40°C to 85°C
PACKAGE
(Green)
AQFN2X2-10
Typical Application Circuit
CT1
EN1
EN2
VBIAS
1uF
CT2
VIN1
IN1
10uF
control
driver
Charge
pump
driver
OUT1
GND
OUT2
IN2
VIN2
10uF
* AQFN2X2-10 Flip-Chip package thermal guide:
1) All of leads can help power dissipation.
2) Keep all of PCB trace(near leads) width as wide as possible.
Please refer to PCB layout considerations for example.
Ver: 0.3
Jun 28, 2013
1
TEL: [phone]
http://www.gmt.com.tw