|
G2993 Datasheet, PDF (1/10 Pages) Global Mixed-mode Technology Inc – DDR Termination Regulator | |||
|
Global Mixed-mode Technology Inc.
DDR Termination Regulator
G2993
Features
ÂOperation Supply Voltage: 1.6V to 5.5V
ÂLow Supply Current: 280µA @ 2.5V
ÂLow Output Offset
ÂSource and Sink Current
ÂLow External Component Count
ÂNo Inductor Required
ÂNo external Resistors Required
ÂThermal Shutdown Protection
ÂSOP-8L package
Applications
ÂDDR-SDRAM Termination Voltage
ÂDDR-I / DDR-II Termination Voltage
ÂSSTL-2
ÂSSTL-3
General Description
The G2993 is a linear regulator designed to meet the
JEDEC SSTL-2 and SSTL-3 (Series Stub Termination
Logic) specifications for termination of DDR-SDRAM.
It contains a high-speed operational amplifier that pro-
vides excellent response to the load transients. This
device can deliver 1.5A continuous current and tran-
sient peaks up to 3A in the application as required for
DDR-SDRAM termination.
The G2993 can easily provide the accurate VTT volt-
ages without external resistors that PCB areas can be
reduced. The quiescent current is as low as 280µA @
2.5V. So the power consumption can meet the low
power consumption applications.
Ordering Information
ORDER
NUMBER
MARKING
TEMP.
RANGE
G2993P1X
G2993 -40°C to 85°C
Note: X Specify the packing type
U: Tape & Reel
T: Tube
PACKAGE
SOP- 8L
Pin Configuration
Typical Application Circuit
VDDQ 1
AVIN 2
PVIN 3
VTT 4
G2993
SOP-8L
8 GND
7 GND
6 GND
5 GND
VDDQ=2.5V
VDD=2.5V
+
47µF
VDDQ
AVIN
PVIN
VTT
GND
VTT=1.25V
+
220µF
Ver: 1.3
Jan 13, 2004
TEL: 886-3-5788833
http://www.gmt.com.tw
1
|
▷ |