|
G2992B Datasheet, PDF (1/1 Pages) Global Mixed-mode Technology Inc – 2A DDR Bus Termination Regulator | |||
|
Global Mixed-mode Technology
G2992B
2A DDR Bus Termination Regulator
Features
 VCNTL Supply Voltage: 3V to 5.5V
 Termination Supply Voltage: 1.2V to 3.6V
 Support DDR I(1.25VTT), DDR II (0.9 VTT), and
DDR III(0.75VTT) Requirements
 Requires Only 20µF Ceramic Output Capacitor
 Low Output Offset
 2A Source and Sink Current
 Low External Component Count
 No Inductor Required
 Thermal Shutdown Protection
 Over Current Protection
 Suspend to RAM (STR) Function with
High-impedance Output
 SOT-23-5, SOP-8 and MSOP-8 (FD) Package
Applications
 DDR-SDRAM Termination Voltage
 DDR I / DDR II / DDRIII Termination Voltage
 SSTL-18
 SSTL-2
 SSTL-3
Ordering Information
ORDER
NUMBER
G2992BT11U
G2992BP11U
G2992BF51U
Note: T1: SOT-23-5 P1: SOP-8
1: Bonding Code
U: Tape & Reel
MARKING
292Bx
G2992B
G2992B
F5: MSOP-8 (FD)
Pin Configuration
General Description
The G2992B is a linear regulator designed to meet the
JEDEC SSTL-18, SSTL-2 and SSTL-3 (Series Stub
Termination Logic) specifications for termination of DDR
I/ II/ III -SDRAM. It contains a high-speed operational
amplifier that provides excellent response to the load
transients. This device can deliver 2A continuous cur-
rent in the application such as required for DDR I/ II/ III
SDRAM termination. The G2992B can easily provide
the accurate VTT voltage with two external resistors
generating reference voltage. The quiescent current is
as low as 750µA @ VCNTL = 3.3V. So the power con-
sumption can meet the low power consumption applica-
tions. The G2992B also has a shutdown function by
setting VREF smaller than 0.2V, that provides Suspend
to RAM (STR) functionality. When in the shutdown
mode, the VTT output (on VOUT pin) will be tri-state pro-
viding a high impendence. A power saving advantage
can be obtained in this mode through lowering the qui-
escent current to 50μA @ VCNTL = 3.3V.
TEMP.
RANGE
-40°C to +125°C
-40°C to +125°C
-40°C to +125°C
PACKAGE
(Green)
SOT-23-5
SOP-8
MSOP-8 (FD)
G2992B
GND 1
5 VREF
VCNTL 2
VIN 3
4 VOUT
SOT-23-5
VIN 1
GND 2
VREF 3
VOUT 4
G2992B
SOP-8
8 VCNTL
VIN 1
G2992B
8 NC
7 VCNTL
6 VCNTL
GND 2
VREF 3
Thermal
Pad
7 NC
6 VCNTL
5 VCNTL
VOUT 4
5 NC
MSOP-8 (FD)
Note: Recommend connecting the Thermal Pad to
the Ground for excellent power dissipation.
Ver: 0.8
May 07, 2013
TEL: 886-3-5788833
http://www.gmt.com.tw
1
|