G2129 Datasheet, PDF (1/1 Pages) Global Mixed-mode Technology Inc – 1-2-4-Bit Bidirectional Voltage-Level Translator with Automatic Direction Sensing and ±15kV ESD Protection

Global Mixed-mode Technology
G2129
1-2-4-Bit Bidirectional Voltage-Level Translator
with Automatic Direction Sensing and ±15kV _ESD
Protection
Features
„ 1.2V to 3.6V on A port and 1.65V to 5.5V on
B port (V_CCA ≤ V_CCB)
„ ^VCC Isolation Feature-If Either V_CC Input Is at
GND, All Outputs Are in the High-Impedance
State
„ EO Input Circuit Referenced to V_CCA
„ ^{Low Power Consumption, 5µA Max ICC}
„ No Power-Supply Sequencing Required-Either
V_{CCA or} V_{CCB Can be Ramped First}
„ Ioff Supports Partial-Power-Down Mode
Operation
„ Latch-Up Performance Exceeds 100mA Per
JESD 78, Class II
„ ESD Protection Exceeds JESD 22
– A Port
2500V Human-Body Model (A114-B)
1500V Charged-Device Model (C101)
– B Port
±15kV Human-Body Model (A114-B)
1500V Charged-Device Model (C101)
„ SC-70-6 (SOT-363), SOT-23-6, SOT-23-8,
AQFN1.7X2.0-12 and AQFN1.5X1.5-8 Package
General Description
This 4-bit noninverting translator uses two separate
configurable power-supply rails. The A port is de-
signed to track V_CCA. V_CCA accepts any supply volt-
age from 1.2V to 3.6V. The B port is designed to
track V_CCB. V_CCB accepts any supply voltage from
1.65V to 5.5V. This allows for universal low-voltage
bidirectional translation between any of the 1.2V,
1.5V, 1.8V, 2.5V, 3.3V, and 5V voltage nodes. V_CCA
should not exceed V_CCB.
When the enable-output (EO) input is low, all
outputs are placed in the high-impedance state.
To ensure the high-impedance state during power
up or power down, EO should be tied to GND
through a pulldown resistor; the minimum value of
the resistor is determined by the current-sourcing
capability of the driver.
The G2129 is designed so that the EO input circuit is
supplied by V_CCA.
This device is fully specified for partial-power-down
applications using Ioff. The I_off circuitry disables the
outputs, preventing damaging current backflow
through the device when it is powered down.
Ordering Information
ORDER
NUMBER
MARKING
G2129TL1U
219x
G2129TB1U
2129x
G2129TM1U
2129x
G2129AE1U
G2129A71U
2129
29
xx
Note: TL: SC-70-6 (SOT-363)
1: Bonding Code
U: Tape & Reel
Pin Configuration
TB: SOT-23-6
TM: SOT-23-8
G2129
G2129
TEMP.
RANGE
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
PACKAGE
(Green)
SC-70-6 (SOT-363)
SOT-23-6
SOT-23-8
AQFN1.7X2.0-12
-40°C to +85°C
AQFN1.5X1.5-8
AE: AQFN1.7X2.0-12 A7: AQFN1.5X1.5-8
Typical Application Circuit
VCCA 1
6 VCCB _{VCCA 1}
8 VCCB
GND 2
A4 3
5 EO
4 B4
GND 2
A3 3
A4 4
7 EO
6 B3
5 B4
SC-70-6 (SOT-363)/
SOT-23-6
G2129
EO
VCCA 1
11 VCCB
A1 2
10 B1
SOT-23-8
G2129
EO
VCCB 1
7
VCCA
1.8V
0.1µF
1.8V
System
Controller
Data
Data
GND
VCCA VCCB
EO
3.3V
System
A1
B1
A2
B2
GND
Data
Data
GND
3.3V
0.1µF
A2 3
9 B2
B3 2
6 A3
A3 4
8 ^B3
A4 5
7 B4
GND
AQFN1.7X2.0-12
B4 3
5 A4
GND
AQFN1.5X1.5-8
Ver: 0.4
Sep 14, 2013
1
TEL: [phone]
http://www.gmt.com.tw