G1563 Datasheet, PDF (1/1 Pages) Global Mixed-mode Technology Inc – Dual Rail-to-Rail Operational Amplifiers

Global Mixed-mode Technology Inc.
G1563
Dual Rail-to-Rail Operational Amplifiers
Features
„ Wide Supply Operation Range +4.5V to +20V
„ Beyond the Rails Input Capability
„ Rail-to-Rail Output Swing
„ Low Supply Current, 3mA / Per Amplifier
(Typical)
„ Low Input Offset Voltage 2mV (Typical)
„ Internal Frequency Compensated for Unit Gain
Stable
„ Wide Bandwidth (unit gain) 30MHz
„ High Slew Rate = 150V/μs
„ Large DC Voltage Gain 80dB (Typical)
„ ±180mA Output Short Current
„ Embedded Over-Temperature Protection
„ Short-Circuit Current Limit Protection
„ MSOP-8, TSSOP-8, SOP-8 (FD) and MSOP-8 (FD)
Package Available
Applications
„ Portable Equipment
„ TFT Vcom/Gamma buffers
„ Battery-Powered Equipment
„ ASIC Input or Output Amplifier
„ Low Power/Low Voltage Applications
General Description
The G1563 is the dual rail-to-rail input/output operation
amplifiers with the low power, high voltage swing. Op-
erating on supplies ranging from 4.5V to 20V, while
current consuming only 3mA / per amplifier, the G1563
is with high unit-gain bandwidth of 30MHz. The G1563
also provides common mode input ability beyond the
supply rails, as well as rail-to-rail output capability.
This enables this amplifier to offer maximum dynamic
range at any supply voltage.
The G1563 also features fast slewing and settling
times, as well as a high output drive capability of
65mA (sink and source). These features make these
amplifiers ideal for high speed filtering and signal con-
ditioning application. Other applications include battery
power, TFT Vcom /Gamma buffers, portable devices,
and anywhere low power consumption is important.
There are over temperature and short-circuit current
limit protection embedded to avoid the unexpected
damages. The G1563 is available in MSOP-8,
TSSOP-8, SOP-8 (FD) and MSOP-8 (FD) package.
Ordering Information
ORDER
NUMBER
G1563P81U
G1563D11U
G1563F11U
G1563F12U
G1563F51U
Note: P8: MSOP-8 D1: TSSOP-8
1 & 2: Bonding Code
U: Tape & Reel
MARKING
G1563
G1563
G1563A
G1563
G1563
F1: SOP-8 (FD)
TEMP.
RANGE
-40°C~ +85°C
-40°C~ +85°C
-40°C~ +85°C
-40°C~ +85°C
-40°C~ +85°C
F5: MSOP-8 (FD)
PACKAGE
(Green)
MSOP-8
TSSOP-8
SOP-8 (FD)
SOP-8 (FD)
MSOP-8 (FD)
Pin Configuration
G1563P81U/G1563D11U
VOUTA 1
8 VCC
VINA- 2
7 VOUTB
VINA+ 3
6 VINB-
VSS 4
5 VINB+
MSOP-8/TSSOP-8
G1563F11U/G1563F51U
VOUTA 1
8 VCC
VINA- 2
VINA+ 3
Thermal
Pad
7 VOUTB
6 VINB-
VSS 4
5 VINB+
SOP-8(FD)/MSOP-8(FD)
G1563F12U
VOUTA 1
8 VOUTB
VINA- 2
VINA+ 3
Thermal
Pad
7 VINB-
6 VINB+
VSS 4
5 VCC
SOP-8(FD)
Note: Recommend connecting the Thermal Pad to the VSS for excellent power dissipation.
Ver: 1.5
Jan 28, 2010
TEL: [phone]
http://www.gmt.com.tw
1