G1214A Datasheet, PDF (1/1 Pages) Global Mixed-mode Technology Inc – Rail-to-Rail I/O

Global Mixed-mode Technology Inc.
G1214A
Rail-to-Rail I/O, High-Slew-Rate OP Amp
Features
„ +2.2V to +7V Single-Supply Operation
„ Input / Output Rail-to-Rail
„ Low Input Current
„ High Output Driving Capacity
„ Low Quiescent Current: 500µA @ 5V
„ High Slew Rate 6.5V/µs
„ High Gain-Bandwidth Product 6.5MHz
„ High Open Loop Gain 95dB
„ High PSRR 70dB
Applications
„ Headphone Driver
„ Portable Equipment
„ Battery-Powered Equipment
„ Multimedia Audio
„ ASIC Input or Output Amplifier
„ Sensor Amplifier
„ Low Power/Low Voltage Applications
„ Set-up Box Audio HP or Pre-driver Applications
General Description
G1214A is a input/output rail-to-rail Operational Ampli-
fier. It can be operated from +2.2V to +7V single sup-
ply or from ±1.1V to ±3.5 dual supply. G1214A can
drive 66mA into resistor loads to within 10% power rail.
AC performance is very excellent with 6.5MHz band-
width, 6.5V/µs Slew Rate, 95dB open loop gain, 60
degree phase margin and low distortion.
Supply current of G1214A is only 500µA per Amplifier.
It is very suitable for low current consumption applica-
tions to control high current loads. Applications include
audio amplification for computers, sound ports, sound
cards and set-top boxes.
G1214A is housed in a small SOT-23-5 package.
Ordering Information
ORDER NUMBER
G1214AT11U
Note:T1: SOT-23-5
1: Bonding Code
U: Tape & Reel
Pin Configuration
MARKING
124Ax
G1214A
OUT 1
5 VDD
VSS ₂
+
IN+ 3
4 IN-
SOT-23-5
TEMP.
RANGE
-40°C to 85°C
PACKAGE
(Green)
SOT-23-5
Typical Application Circuit
VDD
IN
+
G1214A
-
OUT
R_L
2k
Rail-to-Rail is a registered trademark of Nippon Motorola, Ltd.
Ver: 1.0
Feb 11, 2010
1
TEL: [phone]
http://www.gmt.com.tw