050_113 Datasheet, PDF (7/15 Pages) Glenair, Inc. – Media Converter

050-113
Media Converter, Single or Dual Channel, Panel Mount
10/100/1000BASE-T to Fiber Optic Ethernet (SX, LX10 or FX)
Built In Test (BIT) Functionality – UART
This media converter can be offered with built in test functionality accessible via an RS-422 Port. The UART Bit message
is a 10 bit message with an update rate of 1 Hz. The message format can be seen below.
ALARM STATUS MESSAGES
• Fiber Link Status (Up or Down)
• Copper Link Status (Up or Down)
SERIAL STATUS MESSAGE BIT MAPPING
Bit Description
0 Channel 1 Fiber Optic TX Fault (1 = Fault, 0 = No Fault)
1 Channel 1 Ethernet copper Link UP (1 = Link Up, 0 = Link Down)
2 Not used
3 Not used
4 Channel 2 Fiber Optic TX Fault (1 = Fault, 0 = No Fault)
5 Channel 2 Ethernet copper Link UP (1 = Link Up, 0 = Link Down)
6 Not used
7 Not used
©2014 Glenair, Inc.
GLENAIR, INC.
www.glenair.com
REV: 7
∙ 1211 AIR WAY
US Cage Code 06324
∙ GLENDALE, CA 91201-2497 ∙ TEL: [phone]
PAGE 7 of 15
Printed in USA
∙ FAX: [phone]
E-mail: [e-mail]