809-001 Datasheet, PDF (6/7 Pages) Glenair, Inc. – Contacts and Tools Crimp Contacts

Series 80 “Mighty Mouse”
Contacts and Tools
Matched Impedance Coaxial Contacts
Size #12, 50 Ohm Matched Impedance Coaxial Contacts
A
#12 Pin Contact
These contacts offer improved frequency response compared to standard coaxial contacts above.
VSWR is 1.32:1 at 3GHz . Nominal impedance is 50 ohms. Insertion loss at 3GHz is 0.20 dB maximum.
Inner contact is rated at 1 amp, the outer contact 12 amps. DWV voltage rating is 1000 Vac rms sea
B ^{level, 250 Vac at 50,000 feet. Contacts are packaged individually and shipped unassembled with}
instruction sheet. Inner and outer contacts are gold-plated copper alloy. 5000 megohm insulation
resistance. Terminate crimp type coaxial center contact with hand tool 809-128 (Daniels MH992).
Terminate cable braid to contact with 809-129 (Daniels HX4) parallel action crimp tool and 809-120
(Daniels Y196) hex die.
C
#12 Socket Contact
Contact
Type Cable Type
Part Number Termination Fig. Tool Code
Pin
M17/113-RG316
852-016-01 Crimp
Pin
M17/152-00001(RG316DS) 852-016-02 Crimp
1 B, H, P, Q
1 B, H, P, Q
D
Pin
M17/93-RG178
852-016-03 Crimp
1 B, F, P, Q
Pin
TFLEX-405
852-018
Solder
2 (No Tool)
Socket
Socket
M17/113-RG316
852-015-01
M17/152-00001(RG316DS) 852-015-02
Crimp
Crimp
3 B, H, P, Q
3 B, H, P, Q
E
Socket M17/93-RG178
852-015-03 Crimp
3 B, F, P, Q
Socket TFLEX-405
852-017
Solder
4 (No Tool)
Ø.095/.093
(2.41/2.36)
.570 (14.48) MAX
.300/.295
(7.62/7.49)
.151/.148
(3.84/3.76)
.182/.179 _{Ø.095/.093}
(4.62/4.55) _(2.41/2.36)
.570 (14.48) MAX
.300/.295
(7.62/7.49)
.151/.148
(3.84/3.76)
F
G
.182/.179
(4.62/4.55)
SKT TO MATE WITH
.0205/.0195
(0.521/0.495) PIN
.033/.029
(0.83/0.74)
Figure 1
CRIMP
FERRULE
SKT TO MATE WITH
.0205/.0195
(0.521/0.495) PIN
.033/.029
(0.83/0.74)
Figure 2
.560 (14.22) MAX
.289/.279
(7.34/7.09)
.151/.148
(3.84/3.76)
.560 (14.22) MAX
.289/.279
(7.34/7.09)
.151/.148
(3.84/3.76)
.161/.158
(4.09/4.01)
Ø.182/.179
.161/.158
(4.62/4.55) (4.09/4.01)
Ø .0205/.0195
(0.521/0.495)
.033/.029
(0.83/0.74)
Figure 3
CRIMP
FERRULE
Ø .0205/.0195
(0.521/0.495)
.033/.029
(0.83/0.74)
Figure 4
SOLDER
HOLE
H
J
K
Ø.182/.179
(4.62/4.5
L
SOLDER
HOLE
M
© 2009 Glenair, Inc.
Dimensions in inches (millimeters) and are subject to change without notice.
CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
A-7
Rev. 03-FEB-2009
E-Mail: [e-mail]